Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Los Angeles, CA
Gate access control in Los Angeles fails differently than in flatland cities. The hillside neighborhoods from the Hollywood Hills to Bel Air pack 1920s Spanish Colonial gates onto steep, curved driveways, while Santa Ana winds regularly exceed 50 mph and bend cantilever slide gates off their tracks. If your keypad stopped reading codes or the gate won’t stay closed, call (213) 566-1045 and we’ll give you a written price before any tool comes out of the truck.
Why Los Angeles Homes Are Different
Los Angeles has two gate populations, and they fail for opposite reasons. The hillside belt built between 1920 and 1940 is dense with Spanish Colonial Revival and Mediterranean properties whose ornate wrought iron gates sit on steep driveways. Slopes create lateral load stress on posts, and slide gates on these grades need working anti-rollback mechanisms. Meanwhile, the San Fernando Valley’s 1950s and 1960s ranch tracts carry aging Viking and All-O-Matic operators installed during mid-century security upgrades, most of them far past service life.
Santa Ana wind events are the single biggest acute failure driver in Los Angeles. Gusts over 50 mph physically bend slide gates off track and burn out operators that fight the load. Along the coastal strip from Malibu to Venice, salt-laden marine layer accelerates corrosion on hinges, rollers, and circuit boards at a rate inland neighborhoods ten miles east never see. Techs working the Hollywood Hills and Bel Air also find concrete pillar footings that have shifted from decades of minor seismic activity and expansive clay soils. The post looks plumb until you check the swing arc and find the latch has drifted an inch out of alignment.
Fire code adds another layer. Los Angeles’s Very High Fire Hazard Severity Zones cover hillside neighborhoods from Laurel Canyon to Topanga, and automatic driveway gates there must meet LAFD emergency-access requirements, including Knox Box systems or fail-safe open modes. A malfunctioning gate in these zones isn’t just an inconvenience. It’s a code violation and an evacuation liability.
Our Main Los Angeles Services
These three services cover the bulk of what Los Angeles homeowners call us for. Each has its own page with detailed pricing, and each job gets the same Haven Standard treatment: written price first, photo record when we leave.
Gate Repair in Los Angeles
Most repair calls in Los Angeles come in two flavors: wind-damaged slide gates in the hills, and salt-corroded hinges along the coastal strip. We diagnose the mechanical failure, quote a flat price in writing, and fix it. The full breakdown of common repairs and local pricing lives on our Gate Repair in Los Angeles page.
Gate Installation in Los Angeles
New gate installations in Los Angeles often mean working around a steep grade, an HOA design review, or fire-access requirements. We measure on site, write up the scope, and you approve the price before anything is ordered. See the full process and pricing on our Gate Installation in Los Angeles page.
Gate Motor & Opener in Los Angeles
Santa Ana season is hard on operators. A motor that’s been fighting wind load for years will fail on the worst day of the year. We service nine automation brands and we’ll tell you honestly whether the motor can be repaired or needs replacement. Details on our Gate Motor & Opener in Los Angeles page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Los Angeles
Gate access control in Los Angeles means keypads, remotes, phone entry, card readers, and video intercoms that have to survive sun, salt, and wind while keeping the wrong people out. Hillside homes built in the 1920s through 1940s often have ornate gates that were never designed for modern access hardware, and the retrofit has to be done without wrecking the ironwork. Coastal properties face a different problem: salt-laden air corrodes circuit boards and keypad contacts far faster than inland neighborhoods, so a keypad that works fine in Sherman Oaks may be dead in Venice within three years. Our Gate Access Control work follows the same rule as every job we do: a written price before we start, and a photo record of every connection we touched when we leave.
Keypad Entry
Signs you need it
The keypad stops reading codes after rain, or works intermittently when salt corrosion builds on the contacts.
What it costs in Los Angeles
A new keypad, installed and programmed, typically runs $350 to $700 in Los Angeles depending on the existing wiring and mounting surface.
How we do it
We test the circuit, replace or reprogram the keypad, set the codes, and photograph the finished wiring before we leave.
Video Intercom
Signs you need it
The video feed is dead, audio crackles, or the panel works but won’t release the gate from the house.
What it costs in Los Angeles
Video intercom repair and panel replacement runs $450 to $1,000 in Los Angeles depending on wire condition and whether we pull new cable.
How we do it
We trace the wiring from panel to gate, identify the failed component, replace it, and test the release function end to end.
What Gate Access Control Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Keypad replacement | $350 - $700 |
| Remote or receiver replacement | $150 - $350 |
| Video intercom repair | $450 - $1,000 |
How much does gate access control cost in Los Angeles?
Most keypad or remote jobs run $150 to $700, and video intercom work runs $450 to $1,000. The written quote you get before work starts is the price you pay. Call (213) 566-1045.
Can you fix a salt-corroded keypad the same day?
In most cases yes, if the keypad is in stock. Coastal Los Angeles keypads corrode faster than inland ones, so we keep common models on the truck. Call (213) 566-1045 to confirm.
Gate Parts & Welding in Los Angeles
Gate parts and welding in Los Angeles is often the difference between a three-hundred-dollar repair and a three-thousand-dollar replacement. Hillside homes from the 1920s and 1930s carry wrought iron gates that are ninety years old, with hinges and posts that have absorbed decades of seismic settling and wind load. Coastal properties fight corrosion on every ferrous part. Our Gate Parts & Welding work covers hinge replacement, post repair, rail work, and custom welding, all priced in writing before we strike an arc.
Hinge Replacement
Signs you need it
The gate drags on the ground or the latch no longer lines up because the hinge pin has worn oval.
What it costs in Los Angeles
Hinge replacement runs $180 to $450 per hinge in Los Angeles, including removing the old one and welding the new one in place.
How we do it
We support the gate, cut out the failed hinge, weld in a new one, and photograph the penetration and finish.
Post Replacement
Signs you need it
The post leans, the gate sags, or a crack runs through the concrete footing.
What it costs in Los Angeles
Post replacement and re-setting runs $600 to $1,500 in Los Angeles depending on footing depth and whether we pour new concrete.
How we do it
We cut the old post free, dig and pour a new footing, set the post plumb, and let the concrete cure before rehanging the gate.
What Gate Parts & Welding Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Hinge replacement | $180 - $450 per hinge |
| Post replacement | $600 - $1,500 |
| Custom welding repair | $250 - $900 |
How much does welding a gate cost in Los Angeles?
Most welding repairs run $250 to $900 depending on the length of the crack and whether we need to reinforce the section. You get the price in writing before we start. Call (213) 566-1045.
Can you replace a gate post without replacing the whole gate?
Usually yes. We cut the post free, pour a new footing, and rehang the existing gate once the concrete has cured. Call (213) 566-1045 for a written estimate.
Brands We Service in Los Angeles
We work on Elite, Mighty Mule, LiftMaster, and FAAC operators, plus five other major automation brands. Parts for the most common Los Angeles failures ship fast from our local suppliers, and we stock the consumables that wind and salt kill most often. See the full list on our brands page.
Pricing for Gate Repair in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Keypad replacement | $350 - $700 |
| Remote or receiver replacement | $150 - $350 |
| Video intercom repair | $450 - $1,000 |
| Hinge replacement | $180 - $450 per hinge |
| Post replacement | $600 - $1,500 |
| Custom welding repair | $250 - $900 |
What pushes a Los Angeles gate repair price up is usually access: a steep hillside driveway, a gate that has to be supported while we work, or salt corrosion that’s spread from one part into its mounting hardware. Whatever the job, the price is written and handed to you before work starts, and it doesn’t change unless you approve a change order in writing.
Neighborhoods We Serve in Los Angeles
We dispatch across Los Angeles from our metro office, with response times that vary by distance and traffic more than by neighborhood. Some of the areas we work in most often:
- Hollywood Hills
- Bel Air
- Sherman Oaks
- Venice
- Studio City
Service Area - Cities Near Los Angeles
We serve Los Angeles and the surrounding communities. If you’re in West Hollywood, CA, Beverly Hills, CA, Venice, CA, or Pasadena, CA, we can usually reach you the same day for a gate access control or welding repair.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Angeles
Most Los Angeles calls get a same-day or next-day response depending on traffic and location. A live person answers the phone 24/7 at (213) 566-1045, so you’ll know your window before you hang up.
Most repairs don’t need a permit, but if your home is in a Very High Fire Hazard Severity Zone, the gate must stay compliant with LAFD emergency-access requirements. We’ll flag any compliance issue during the visit.
We provide written specs, drawings, and material lists you can submit to your HOA. The approval itself sits with the association, but the paperwork we hand you is complete enough to move it forward. Call (213) 566-1045 to schedule.
If your gate access control is dead, your hinges are sagging, or the Santa Ana winds found the weak point in your rail, call (213) 566-1045. You’ll get a written price before work starts, a documented photo record when it’s done, and a live person on the phone at any hour.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.