Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Venice, CA
Gate access control in Venice runs into two problems most of Los Angeles never sees: salt air that corrodes keypads and card readers within a few seasons, and canal-facing homes where the gate opens onto a public pedestrian path instead of a private driveway. We handle both. If your gate won’t lock, won’t open for a code, or the intercom has gone dead, call (213) 566-1045 and a live person answers.
Why Venice Homes Are Different
Venice’s housing stock spans 1910s beach bungalows on the walk streets, Craftsman cottages east of Abbot Kinney, and modern glass-and-steel infill west of Lincoln. The older homes often carry custom iron gates built to fit narrow lots that were never standardized. The newer ones frequently run automation on gates exposed to direct Pacific wind. What ties them together is the marine layer. Hardware that lasts a decade in Culver City seizes in Venice within a few years because salt-laden onshore air accelerates oxidation on hinges, latches, rollers, and every exposed electrical contact. Canal-district homes add a second layer: gates facing Carroll Canal or the Grand Canal are subject to Venice Canal Historic District design guidelines, which can require material and aesthetic approval before a replacement moves forward. Homes east of Lincoln deal with the same humidity but add gates that open onto alley-accessed parking, where clearances are tight and hardware takes more impact abuse.
Our Main Venice Services
Venice homeowners call us most often for three things: a gate that has stopped moving, a gate that never existed and needs to be built for an odd lot, and a motor that powers a gate already in place. Each service has its own Venice page with the full detail.
Gate Repair in Venice
A gate that drags on the ground, a latch that won’t catch, a hinge that screams when the wind pushes against it. In Venice these failures come faster because the air eats ferrous metal. We repair the gate itself: hinges, latches, rollers, drop rods, sagging frames, rotted posts. Most repairs finish same-day. Full detail on Gate Repair in Venice.
Gate Installation in Venice
Venice lots are narrow, angled, and frequently not rectangular. A catalog gate rarely fits. We measure, fabricate, and install gates that match the house, the setback, and in canal-adjacent properties the Historic District’s design expectations. Written price before anything is ordered. Full detail on Gate Installation in Venice.
Gate Motor & Opener in Venice
Salt air and gate motors are a bad pairing. We service and replace operators from nine major brands, including Viking, Ghost Controls, DoorKing, and Elite, and we document every limit-switch setting and wiring change in the job record. Full detail on Gate Motor & Opener in Venice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Venice
Gate access control in Venice means keypads corroded by salt air, card readers that fail after two winters, and intercoms that work fine until the marine layer gets into the board. Canal-facing homes add a wrinkle no other LA neighborhood has: the gate opens onto a public pedestrian path, so the access system has to lock reliably every single cycle. No exceptions. We install and repair keypads, remote systems, phone entry, card readers, and video intercoms, and every job leaves a documented record of what was found and what was changed. For the full scope of this work, see Gate Access Control.
Keypad Entry
Signs you need it
You’re issuing the same code to everyone because changing it is a hassle, or the keypad face has gone chalky from salt exposure and buttons stick.
What it costs in Venice
Keypad entry in Venice typically runs $240-$525 installed, depending on whether we’re replacing an existing unit or pulling new low-voltage wire.
How we do it
We mount the keypad on a protected surface, run weather-sealed low-voltage wiring, program codes, and photograph the final install.
Video Intercom
Signs you need it
You can’t see who’s at the gate before opening it, or the existing intercom screen has failed from humidity exposure.
What it costs in Venice
Video intercom systems typically fall between $350-$975 installed in Venice, depending on monitor size and whether wiring already exists.
How we do it
We mount the camera at gate height, run or reuse the wiring, connect the indoor monitor, and test the call-and-release function before we leave.
Phone Entry
Signs you need it
You want gate access without carrying a remote, or visitors arrive when you’re not home and can’t reach you.
What it costs in Venice
Phone entry systems typically run $300-$700 installed, depending on carrier compatibility and whether a cellular bridge is needed.
How we do it
We wire the phone-entry controller into the gate operator, configure the call routing, and test from the street side before we leave.
What Gate Access Control Costs in Venice
| Item | Typical range in Venice |
|---|---|
| Keypad entry installed | $240-$525 |
| Phone entry installed | $300-$700 |
| Video intercom installed | $350-$975 |
Does salt air actually damage gate keypads?
Yes. Venice’s onshore wind carries salt-laden moisture that corrodes circuit boards and button contacts faster than inland air. Keypads near the canals or west of Pacific typically show visible face degradation within two to three years.
Can you add a code to my existing gate opener?
Almost always. Most operators accept an external keypad or phone-entry module regardless of motor brand. We wire the device into the existing board and photograph every connection so the record stays clean. Call (213) 566-1045 for a written quote.
Gate Parts & Welding in Venice
Old Venice gates fail at the hardware first. Hinges seize from salt, posts rot at the base from trapped humidity, and custom iron work from the 1920s bends where a modern stamped part won’t fit. When a part is broken and a replacement doesn’t exist anymore, we weld it, reinforce it, or fabricate the missing piece to match. For the full scope of this work, see Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate leans, the hinge pin has worn into an oval, or the gate scrapes the ground on the latch side.
What it costs in Venice
Hinge replacement in Venice typically runs $70-$160 per hinge installed, including the heavier-duty hardware salt air demands.
How we do it
We lift the gate, cut or unbolt the old hinges, mount new ones, and photograph the new pin alignment.
Custom Welding
Signs you need it
A gate rail, picket, or frame tube is cracked, broken, or rusted through and the part isn’t available off a shelf.
What it costs in Venice
Custom welding typically runs $140-$380 per repair in Venice, depending on the extent of the fabrication and metal prep.
How we do it
We clean the repair site, weld it, grind it smooth, and photograph the finished weld before the paint goes on.
Gate Rollers
Signs you need it
The gate drags along its track, the roller wheels wobble, or the gate makes a grinding sound when it moves.
What it costs in Venice
Gate roller replacement typically runs $110-$260 per roller assembly, including track alignment.
How we do it
We lift the gate, swap the roller assembly, set the track gap, and photograph the new position.
What Gate Parts & Welding Costs in Venice
| Item | Typical range in Venice |
|---|---|
| Hinge replacement (per hinge) | $70-$160 |
| Gate roller replacement | $110-$260 |
| Custom welding repair | $140-$380 |
Can you weld a broken iron gate on site?
Yes. We carry mobile welding equipment, so most cracks and broken pickets are repaired at the property. The weld is ground smooth and photographed before the job closes. Call (213) 566-1045 for a written price first.
Do you replace just the hinge or the whole gate?
Usually just the hinge. Gates outlive their hardware, and a hinge replacement at $70-$160 per hinge is far cheaper than a new gate. We’ll tell you if the gate frame itself has failed.
Brands We Service in Venice
We work on operators and access systems from Viking, Ghost Controls, DoorKing, Elite, FAAC, LiftMaster, and BFT. Our trucks carry common parts for these brands which speeds up most Venice jobs. See our brands for the full list.
Pricing for Gate Repair in Venice, CA
| Service | Typical range in Venice |
|---|---|
| Keypad entry installed | $240-$525 |
| Phone entry installed | $300-$700 |
| Video intercom installed | $350-$975 |
| Hinge replacement (per hinge) | $70-$160 |
| Post replacement | $340-$780 |
| Rail repair | $160-$420 |
| Custom welding repair | $140-$380 |
| Gate roller replacement | $110-$260 |
Salt corrosion drives most pricing differences in Venice. Hardware that would be a simple swap inland often needs cleaning, rust treatment, and sometimes fabrication before new parts fit. Whatever the job, you get a written price before any work starts.
Neighborhoods We Serve in Venice
We cover the full Venice area from the Canals to the walk streets to the east side near Lincoln. Response within Venice is typically same-day or next-morning depending on the job.
- Venice Canals
- Silver Strand
- Marina Peninsula
- Oakwood
- Windward / Abbot Kinney
Service Area - Cities Near Venice
Vance Gate Repair serves Venice and the surrounding communities along the west side. For gates in Santa Monica, CA, Beverly Hills, CA, West Hollywood, CA, or Sherman Oaks, CA, crews dispatch from the same Los Angeles office and carry the same written-price policy to every job.
Serving Venice, CA - Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Venice
Most Venice calls are answered by a live person 24/7, and jobs west of Lincoln can often be seen the same day. Canal-district and Silver Strand calls may take until the following morning depending on the technician’s route. Call (213) 566-1045 to check current availability.
They can. Small hardware repairs are generally fine, but a full replacement on a canal-facing gate may require material and aesthetic review through LA City’s Office of Historic Resources. We can flag that early so you’re not surprised partway through.
Yes. Every job in Venice gets a written price, quoted and agreed before any work begins. If we find something else while the gate is open, you’ll get a separate written number before anything additional is done.
Call Vance Gate Repair at (213) 566-1045 for a free estimate on gate repair in Venice, CA. A live person answers, the price is written before work starts, and every visit leaves a documented photo record.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Venice Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.