Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Beverly Hills, CA
Gate access control in Beverly Hills usually means integrating keypads, phone entry, or video intercom into automation that already runs through Crestron, Control4, or Lutron. The marine layer off the Pacific, about 8 miles away, leaves salt-laden moisture on exposed gate hardware every morning, so electronics corrode faster here than inland. Most of what we do is diagnose why a reader stopped releasing the lock, then wire the replacement so the whole-home system still sees it. Call (213) 566-1045 and a live person answers, any hour.
Why Beverly Hills Homes Are Different
Beverly Hills has one of the highest concentrations of custom automated driveway gates in the country. Estates in the Flats and hillside corridors like Trousdale run ornate dual-swing wrought-iron gates weighing 500 to 1,000+ lbs, driven by commercial-grade operators from FAAC, BFT, and Viking rather than the residential hardware common in neighboring cities. A technician who only fixes the mechanical side loses the job to one who can navigate the control board and the smart-home hub at the same time.
The housing stock spans 1920s Spanish Colonial Revival and Tudor Revival in the Flats, 1955 to 1964 mid-century modern homes in Trousdale, and post-1980s mega-mansions throughout the hills. Original gates from the 1940s and 1950s are often one-off custom iron fabrications with no replacement parts available. That means repair work frequently includes metal fabrication alongside the motor service.
Salt-laden morning moisture accelerates rust and pitting on ornate ironwork and hinge hardware. Then dry Santa Ana wind events cycle through, which causes wooden gate posts and pilasters to crack and shift, throwing swing gates out of alignment seasonally. Beverly Hills also enforces its own municipal permitting process for gate installations and major repairs, separate from LA County. Inspectors are known to flag unpermitted gate motor replacements on grand estates during unrelated inspections, which is a compliance headache contractors working only in West Hollywood rarely encounter.
Our Main Beverly Hills Services
Most Beverly Hills homeowners call us for one of three jobs: repairing an existing gate, installing a new one, or replacing the motor and opener that drives it. Each has its own page below with pricing and local details.
Gate Repair in Beverly Hills
Repair work on Beverly Hills gates usually involves finding why a heavy custom iron gate stopped swinging or sliding, then fixing the mechanical or electrical fault without replacing what still works. The coastal moisture and seasonal Santa Ana shifts mean misaligned hinges, rusted rollers, and binding posts show up more often here than in the Valley. We photograph what we find, hand you a written price before any tool comes out, and leave a documented record of every adjustment. Read the full breakdown on our Gate Repair in Beverly Hills page.
Gate Installation in Beverly Hills
New gate installation in Beverly Hills means working around the city’s own permitting process, which is separate from LA County and strictly enforced. Estates in the Flats and hills often need custom fabrication to match 1920s Spanish Revival or mid-century Trousdale architecture, and the operator must integrate with existing Crestron, Control4, or Lutron systems. We measure, specify, and price everything in writing before ordering a single part. See Gate Installation in Beverly Hills for specifics.
Gate Motor & Opener in Beverly Hills
Motor and opener replacement on a Beverly Hills estate rarely means swapping in a big-box residential unit. Gates weighing 1,000 lbs need commercial-grade operators from FAAC, BFT, Viking, or LiftMaster, and the new board has to talk to the home automation system already on the property. We service all nine major brands and price the replacement in writing, including the control-board integration. Details are on our Gate Motor & Opener in Beverly Hills page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Beverly Hills
Gate access control in Beverly Hills means the electronics and entry hardware that decide who gets through: keypads, remotes, phone entry, card readers, and video intercoms. On estates in the Flats and Trousdale, these systems almost always tie into whole-home automation platforms like Crestron, Control4, or Lutron, so a replacement reader has to be wired so the hub still sees it. This is the work our founder Adrian Vance has done since 2014, and it’s the core of our Gate Access Control service.
The marine layer off the Pacific deposits salt-laden moisture on exterior electronics every morning, which corrodes keypad contacts, reader terminals, and intercom enclosures faster than inland locations. A keypad that works in Sherman Oaks may short out every two years three miles closer to the coast. We replace boards and seal enclosures with the coastal exposure in mind, then document the wiring so the next technician doesn’t have to trace it blind.
Keypad Entry
Signs you need it
The keypad stops sending digits to the control board, or some keys require multiple presses before the gate responds.
What it costs in Beverly Hills
Beverly Hills keypad replacement typically runs $200 to $500, depending on whether the reader is a flush-mount estate model or a surface-mount pedestal unit.
How we do it
We test voltage at the keypad, replace the reader and any corroded terminals, reprogram entry codes, and photograph the finished wiring.
Video Intercom
Signs you need it
The video feed drops, the talk-back audio hums or cuts out, or the handset inside the house stops releasing the gate.
What it costs in Beverly Hills
Video intercom repair in Beverly Hills runs $300 to $650 for a wired estate system, and $900 to $2,500 for a full HD upgrade with two-way audio.
How we do it
We isolate whether the fault is the outside station, the inside monitor, or the cable between them, then replace only the failed component and re-terminate the wiring.
What Gate Access Control Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Reprogramming or code reset | $85-$150 |
| Keypad replacement | $200-$500 |
| Video intercom repair | $300-$650 |
Can you integrate a new keypad with my existing Control4 system?
Yes. We wire the replacement reader so the Control4, Crestron, or Lutron hub still sees it as the same device, then test the release command from the house before we leave. The written price includes that integration work.
How fast can you replace a failed phone entry system in Beverly Hills?
Most phone entry replacements are done same day because we stock the common boards and stations locally. The written price is handed over before any work starts, and you get a photo record of the new wiring when we finish. Call (213) 566-1045 to schedule.
Gate Parts & Welding in Beverly Hills
Gate parts and welding in Beverly Hills often means fabricating a replacement hinge, bracket, or rail section for a gate that was custom-built in the 1940s or 1950s and has no off-the-shelf parts available. The salt-laden marine air pits and rusts exposed ironwork faster here than inland, so we regularly weld in new steel where the original has thinned to failure. Our Gate Parts & Welding work covers everything from a single hinge to a rebuilt rail on a 1,000 lb estate gate.
Wooden gate posts and pilasters crack and shift as coastal humidity cycles with dry Santa Ana winds, which throws swing gates out of alignment and shears bolts over time. We fabricate steel reinforcement plates, re-set posts in new concrete, and weld cracked iron panels back to structural soundness, then document every weld with photos.
Hinge Replacement
Signs you need it
The gate sags, scrapes the driveway, or the hinge pin shows visible rust bloom and wear.
What it costs in Beverly Hills
Hinge replacement on a Beverly Hills gate typically runs $150 to $450 per hinge, depending on whether we need to weld a new bracket or can bolt to intact steel.
How we do it
We support the gate, cut or unbolt the failed hinge, weld or bolt the replacement in place, then re-set the swing alignment and photograph the finished hardware.
Rail Repair
Signs you need it
The sliding gate jumps, binds, or makes a grinding sound as the wheels pass over a rusted or bent rail section.
What it costs in Beverly Hills
Rail repair in Beverly Hills runs $250 to $600 for a welded splice or a replacement rail section on a residential slide gate.
How we do it
We cut out the rusted or bent section, weld in new steel matched to the original profile, grind the joint smooth, and verify wheel travel before we leave.
What Gate Parts & Welding Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Hinge replacement (per hinge) | $150-$450 |
| Post replacement (steel or wood) | $350-$1,200 |
| Custom weld repair | $250-$600 |
Can you weld a cracked iron gate panel without replacing the whole gate?
Yes. We grind out the crack, weld in new steel matched to the original iron, and reinforce the back side so the repair outlasts the surrounding metal. You get a photo record of the weld before it’s ground smooth.
Do you replace wooden gate posts that have shifted from the Santa Ana winds?
We do. We remove the cracked post, set a new pressure-treated or steel post in concrete, and re-hang the gate to swing clean. The written price includes the concrete work and the final alignment. Call (213) 566-1045 for an exact quote.
Brands We Service in Beverly Hills
We work on whatever motor is already on the property, including LiftMaster, FAAC, Elite, and Mighty Mule. Common boards, receivers, and safety edges are stocked locally, so most Beverly Hills repairs don’t wait on a parts shipment. See our brands for the full list.
Pricing for Gate Repair in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Reprogramming or code reset | $85-$150 |
| Keypad replacement | $200-$500 |
| Video intercom repair | $300-$650 |
| Hinge replacement (per hinge) | $150-$450 |
| Post replacement (steel or wood) | $350-$1,200 |
| Custom weld repair | $250-$600 |
| Rail repair | $250-$600 |
| Full HD video intercom upgrade | $900-$2,500 |
Prices in Beverly Hills push toward the upper end when the gate is a one-off custom fabrication, when the automation ties into a whole-home system that needs re-integration, or when salt corrosion has spread beyond the visible failure point. Every job carries a written price handed over before work starts, under Clause 1 of the Haven Standard. No surprise invoice at the end.
Neighborhoods We Serve in Beverly Hills
We run calls across Beverly Hills daily, from the estate-lined streets of the Flats to the hillside driveways of Trousdale and the canyons above. Most jobs are scheduled same day or next morning.
- The Flats
- Trousdale Estates
- Beverly Hills Post Office
- Beverly Glen
- Coldwater Canyon
Service Area - Cities Near Beverly Hills
Our crews also cover the neighboring cities around Beverly Hills, including West Hollywood, CA, Studio City, CA, Sherman Oaks, CA, and Santa Monica, CA. Dispatch is coordinated from our Los Angeles office, but the technicians and parts arrive from close by.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Beverly Hills
Most Beverly Hills calls are scheduled same day when you reach us before early afternoon, and emergency calls are dispatched as soon as a technician is free. A live person answers the phone 24/7, so you’ll know the schedule immediately when you call.
Routine repairs like hinge replacement, keypad repair, and motor service don’t require a permit. Gate installations and major structural changes go through the City of Beverly Hills’ own permitting process, and we handle that paperwork as part of the written scope.
We service the gate automation and the access control side, then verify the whole-home system still sends the release command correctly. You get a written record of what was changed and a photo log of the finished wiring, so the integrator has everything they need.
If your Beverly Hills gate needs repair, a new access control system, or welding work, call Vance Gate Repair at (213) 566-1045. You’ll get a written price before any work begins, and a documented record of everything we did when we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.