Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for North Hollywood Homeowners
A gate that won’t close isn’t just an inconvenience, it’s a security risk. In North Hollywood, where driveway gates are common on both Chandler Estates properties and the newer builds near the NoHo Arts District, a failed opener or a sagging hinge usually means the gate gets left open, and an open gate stops doing its job. Vance Gate Repair has repaired and installed more than 22,000 gates since 2014, and every one of those jobs started the same way: a written price handed over before any work began. Adrian Vance built this company on the commercial access-control habit of documenting everything, so when our technician leaves your North Hollywood property, you’ll have a photo record of what was found, what was adjusted, and what was replaced. If your gate is acting up, call (213) 566-1045. A live person answers, any hour, and we schedule same-day service across North Hollywood.
What Our Gate Repair Service Includes
Electric Gate Repair
Electric Gate Repair covers the powered side of your gate: the operator, the control board, the wiring, and the safety sensors. In North Hollywood, we regularly see issues caused by our summer heat degrading wire insulation or by landscape irrigation soaking junction boxes near the street. When we arrive, we test the full circuit path, identify the failed component, and show you the reading before we replace anything. The written price you receive before work starts covers the repair, the part, and the labor with no end-of-job surprises.
Automatic Gate Repair
Automatic Gate Repair means the gate opens and closes on its own, every time, without hesitation or reversal. Common failures include limit switches that were never set correctly after the last repair, receiver boards that no longer read a remote, and motors that have burned out from running against a misaligned track. We reset limits to manufacturer spec, photograph the new positions, and test the full cycle at least ten times before we call the job done. If the gate still isn’t right within a year, the 365-Day Done Right Promise means we come back and make it right at no additional charge.
Hinge & Post Repair
Hinge & Post Repair addresses the hinges and posts that carry the entire weight of the gate, and in North Hollywood’s dry, shifting soil, posts settle and pull hinges out of alignment. A gate that scrapes the ground or sags at the latch side is usually telling you the post has moved or the hinge bearing is worn. We remove and reset posts in fresh concrete where needed, or replace worn hinge bearings and weld cracked hinge plates back to the frame. Our documentation habit means you’ll see photos of the post base before and after, so you know exactly what was buried in the ground.
Gate Realignment
Gate Realignment restores the gate to level and plumb so it travels cleanly through its arc without dragging or binding. When a gate is even a half-inch out of level, the motor works harder, the hinges wear faster, and the safety edges can trip for no reason. We use a digital level and measure the gap at the latch, the hinge side, and mid-span, then correct the alignment at the hinges and posts rather than masking the problem with a taller wheel or a latch shim. Realignment is often the difference between a gate that lasts five more years and one that fails again next season.
Lock Repair
Gate locks fail in predictable ways: keypads stop reading codes, maglocks lose holding force, solenoid releases corrode, and mechanical deadbolts bind after years of weather. For an electric gate, a failed lock means the gate can be pushed open by hand even when it’s “closed,” which defeats the security purpose. We service and replace keypads, maglocks, electric strikes, and mechanical gate locks, then photograph the installed hardware and provide the part number in your job record. Every lock repair is covered by the 365-Day Done Right Promise.
Weld & Rust Repair
Steel and wrought-iron gates in North Hollywood take sun, Santa Ana winddust, and the occasional winter rain, and rust is the result. When rust advances to pitting or a cracked weld, the structural integrity of the gate is compromised. We grind back the affected area, weld cracked seams with proper penetration, treat the metal, and repaint to match. The photo log you receive shows the damage as found, the welded repair before paint, and the finished surface, so there’s no guesswork about what was done behind the paint.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
Most gate companies in Los Angeles will tell you they work on everything, then try to sell you a new motor when they can’t fix the one you have. We take a different approach. Adrian Vance spent years on commercial access-control sites before starting this company in 2014, and that background means we diagnose before we recommend replacement. We service Ghost Controls and Viking openers regularly, including the battery-backup models that North Hollywood homeowners rely on during heat-wave brownouts. If a Ghost Controls arm isn’t responding, we trace the harness, test the control board, and check the actuator travel before recommending any part.
We also work on DoorKing and Elite operators, two brands that show up often on older North Hollywood properties and multi-unit gates. DoorKing’s relay-based boards need a technician who can read a wiring diagram rather than guess at it, and Elite’s slide-gate operators have limit and torque settings that need to be set precisely or the gate slams. Whether you have one of these brands or any other make, our technicians arrive prepared to service what’s on the property, not steer you toward a replacement you don’t need yet.
BeforeAfterSigns You Need Gate Repair Right Now
- The gate reverses halfway and goes back open. This usually means the safety edge or photo-eye is triggering falsely, but it can also be a torque limiter set too low. Either way, the gate isn’t securing anything, and the motor is cycling twice as often as it should, which shortens its life.
- You hear grinding, squealing, or a metallic pop when the gate moves. Grinding is a failing bearing or a sprocket eating the chain. A pop is often a weld letting go. These sounds mean wear is advancing, and running the gate more makes the eventual repair more expensive.
- The gate scrapes the ground or won’t line up with the latch. Scraping is almost always a hinge or post problem, not a wheel problem. If you keep running it, you’ll add a motor burnout to the hinge repair.
- The remote works only sometimes, or only from close range. Intermittent remote function can be a failing receiver board, a weak antenna connection, or radio interference from nearby transmitters. What it’s not is a mystery: we bench-test the receiver and replace the correct component.
- The gate was hit, backed into, or forced open. After any impact, the alignment, hinge welds, and operator mounting brackets all need to be checked. A gate that was forced open has likely stripped the operator’s gear train or bent a hinge pin, and those don’t heal on their own.
Our Gate Repair Process - Step by Step
Step 1: You call, a person answers.
Call (213) 566-1045 and you’ll speak to a live person, day or night. Describe what the gate is doing, and we’ll tell you what a technician will check and what the common fixes cost for that problem in North Hollywood. If it’s an emergency, we schedule same-day, and the technician’s name and photo are sent to you before arrival.
Step 2: The technician arrives and diagnoses.
Your technician checks the operator, the safety devices, the hinges, the alignment, the wiring, and the power supply. We document everything: voltage readings at the board, limit-switch positions, gear wear, post lean, weld cracks. You don’t have to be a gate expert to understand what we found, because we show you the readings and the photos before we discuss any repair.
Step 3: You get a written price, before work starts.
This is Haven Standard Clause 1: have it in writing. You’ll get a flat price for the repair, the part, and the labor, written on paper and handed to you. If you’d like, get a second opinion from another company; bring us their written estimate and we’ll review it at no cost. There’s no obligation to proceed if the price doesn’t make sense to you.
Step 4: We complete the repair and test the gate.
After you approve the written price, the technician performs the repair and cycles the gate repeatedly: full open, full close, safety reversal test on both edges, remote test from the street and from the house. We set limits to manufacturer specification and photograph the final positions.
Step 5: You receive a documented record.
Before we leave your North Hollywood property, you get a photo log of every adjustment and a written record of every part number installed. That record stays in our system, so if anything ever changes, the next technician isn’t starting from zero. And if the repair isn’t right within 365 days, we make it right at no additional charge.
How Much Does Gate Repair Cost in North Hollywood?
Gate repair in North Hollywood typically runs between $180 and $750 for most common issues, depending on what’s failed and what brand of operator you have. A hinge and post reset usually lands between $300 and $600. A lock replacement runs $180 to $400 depending on whether it’s a mechanical deadbolt or an electric maglock. A control board replacement on a Viking or DoorKing unit is commonly $350 to $700 with the part. A full operator replacement, when the motor itself is beyond repair, typically falls between $800 and $1,800 installed, depending on the brand and whether the arm bracket and mounting plate are reusable.
The biggest factor in price is whether the underlying mechanical problem gets fixed at the same time as the electrical problem. If a gate is out of alignment and the motor burns out fighting it, you’ll pay twice if the alignment is left for later. That’s why we diagnose the whole gate, not just the component that stopped. You avoid overpaying by getting a written, line-item price before any work starts and by making sure the diagnosis includes the mechanical side as well as the electrical. Our estimates are free, they’re written, and they’re yours to keep whether or not you proceed.
Gate Repair Near North Hollywood - Our Service Area
Vance Gate Repair serves North Hollywood and the surrounding San Fernando Valley communities, including Studio City, Burbank, Van Nuys, Sherman Oaks, Encino, Reseda, Tarzana, and San Fernando. We also work south of the hill in West Hollywood, Beverly Hills, and greater Los Angeles. Most repairs in North Hollywood are completed same-day when called in before early afternoon, and our 24/7 phone line means you’ll always reach a person, never a voicemail queue. Back to our North Hollywood gate repair page or the homepage for more on our full range of gate services.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in North Hollywood
Gate repair is the process of diagnosing and fixing a gate that doesn’t open, close, lock, or align correctly. It covers the gate itself (hinges, posts, frame, welds, alignment), the operator and motor, safety devices, locks, and wiring. In North Hollywood, Vance Gate Repair provides a written price before the work starts and a documented photo record when the work is done.
Most common repairs take between one and three hours on site. A limit switch reset or photo-eye realignment can be done in under an hour, while a post reset with new concrete takes several hours because the concrete needs to set before the gate can be re-hung. Your technician will give you a time estimate with the written price before any work begins.
Typical gate repairs in North Hollywood run $180 to $750, with operator replacements between $800 and $1,800 when the motor itself has failed. The exact price depends on the brand of your operator, what’s failed, and whether any mechanical issues like hinge wear or alignment need correction at the same time. Every price is written and handed to you before work starts, and estimates are free.
Yes, we service Viking gate openers, including swing and slide models, and we stock common Viking replacement parts. We work on Viking control boards, actuators, and limit switches, and we don’t steer you toward a new unit just because the brand is older. If a Viking isn’t responding, call (213) 566-1045 and we’ll tell you what the likely fix costs.
Yes. A live person answers our phone 24 hours a day, seven days a week, and we schedule emergency service for gates that won’t close or won’t open and are blocking access or leaving a property unsecured. Tell us what’s happening when you call (213) 566-1045, and we’ll tell you honestly whether it needs immediate dispatch or can wait until morning.
Every repair we complete is covered by the 365-Day Done Right Promise. If the repair isn’t right within one full year, we return and make it right at no additional charge, no argument and no expiration games. The promise applies to the work we did, and your job record includes the photo log and part numbers, so there’s never a question about what was installed.
Clear the area around the gate so the technician has about three feet of working room on both sides, and if possible, park any cars that block the gate’s path elsewhere for the visit. If you have a gate remote, keypad code, or manual release key, have them available for testing. Most importantly, have any questions ready: your technician will show you the diagnosis and the written price before work starts, and a good question at that point saves misunderstanding later.
Schedule Your Gate Repair Service in North Hollywood Today
If your gate is misbehaving, don’t wait until it fails completely on the one morning you’re running late. Call (213) 566-1045 for a free, no-obligation estimate. You’ll speak to a real person, we’ll schedule a technician with a name and a face, and you’ll get a written price before any work starts. That’s the way gate repair should work in North Hollywood.
Written by Adrian Vance, Owner at Vance Gate Repair, serving North Hollywood since 2014.