Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Beverly Hills
A broken driveway gate in Beverly Hills is rarely a simple hinge fix. We work on ornate custom iron gates weighing 500 to 1,000+ pounds, driven by commercial-grade operators and tied into Crestron, Control4, and Lutron systems. When a gate stops opening in the Flats or along Benedict Canyon, the cause is usually buried in the control board, the hinge post, or both. That’s the work we do. Call (213) 566-1045 and a live person answers, any hour.
We dispatch technicians to Beverly Hills from our Los Angeles office, and we know the streets well enough to plan around Coldwater Canyon traffic and Trousdale’s steep grades. Our Gate Repair team carries parts for FAAC, BFT, LiftMaster, Elite, and Mighty Mule so most repairs finish in a single visit. Before any work starts, you get a written price. Before we leave, you get a photo record of every adjustment.
Why Vance Gate Repair North Hollywood Is Beverly Hills’s Preferred Gate Repair Company
Adrian Vance started this company in 2014 doing commercial access-control documentation. That habit carried over: every residential gate we touch in Beverly Hills gets the same written scope, written price, and photographed record a commercial site would receive. There is no handshake estimate and no invoice surprise at the end. The price is handed to you in writing before anyone picks up a tool.
We service more than 22,000 gates since the company started, and the Beverly Hills portion of that number skews heavily toward custom work: dual-swing iron gates, underground operators, intercom arrays, and smart-home integrations. Homeowners in Trousdale Estates and the Flats don’t have off-the-shelf gates, and they don’t want a tech guessing at their control board. They want someone who reads the wiring diagram and documents the limit-switch readings. That’s our normal procedure.
Every job is covered by the 365-Day Done Right Promise. If the repair is not right, we make it right within that year, no argument and no additional charge. The promise is written into the scope so there’s nothing to negotiate later.
We also offer a free second opinion on any written estimate from another company. Bring the paperwork and we’ll review it at no cost. If you’re deciding between two bids in Beverly Hills, that extra read often exposes a scope gap before the work starts.
Our Gate Repair Services in Beverly Hills
Electric Gate Repair
Electric gate failures in Beverly Hills often trace back to the control board, not the motor. A Crestron or Control4 scene that fires the gate and the courtyard lights together can confuse an older FAAC board if the relay timing is off. We read the board, test the photo-eyes (the infrared beam that stops the gate if something crosses the path), and set the limit switches to the correct travel. You get a written record of what was found and what was changed.
Automatic Gate Repair
Automatic systems on Beverly Hills estates tend to run longer and heavier than anything in West Hollywood or Studio City. A gate that opens 30 times a day for staff, deliveries, and family builds heat in the operator and wear on the arm bracket. We inspect the full mechanical path: motor, gearbox, chain or arm, limit switches, and safety edges. Repair first; replacement only when the operator is genuinely beyond economical service.
Hinge & Post Repair
Heavy iron gates hang on hinge posts set in concrete or bolted to pilasters. In Beverly Hills, a full inch of post shift is enough to burn out a FAAC or BFT operator within months. We saw exactly that on a Trousdale job: a 900-pound dual-swing gate whose operator burned out because the hinge post had drifted. We trued the footing, re-welded the sagging panel, and re-synced the operator to the estate’s Crestron system. The gate now opens silently and the intercom camera activates without lag.
Gate Realignment
Seasonal movement is normal here. The daily marine layer moistens wooden posts and pilasters, then Santa Ana winds dry them out. The cycle cracks and shifts the structure, and a gate that scraped the driveway in June may bind entirely by October. We check post plumb, hinge wear, and gate leaf weight distribution, then adjust or refit as needed. Realignment is prevention, not patchwork.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Beverly Hills
We work on whatever operator is already on the property. That includes LiftMaster, FAAC, BFT, Elite, Mighty Mule, Linear, Viking, Ghost Controls, and DoorKing. No steering toward a full replacement just because we carry a different brand. For Beverly Hills customers, we keep common FAAC and LiftMaster parts stocked on our trucks so the repair doesn’t stretch into a second visit while a part ships from a distributor.
Common Gate Repair Problems We See in Beverly Hills Homes
- Rust and pitting on ornate iron panels. The marine layer rolls in from the Pacific about eight miles away and leaves salt-laden moisture on exposed iron every morning. Ornate scrollwork and welded seams rust faster here than they do in Sherman Oaks. We cut, patch, and re-weld the affected sections, then treat the surface so the repair doesn’t fail in the same spot a year later.
- Seized hinge posts from corrosion. Hinge hardware swells and binds when rust creeps into the pin and barrel. On a 600-pound gate, a seized hinge can stall the operator and trip the safety reversal. We free or replace the hinge assembly, then re-set the operator’s force limits to the correct range.
- Sagging gates caused by cracked pilasters. The dry Santa Ana cycle shrinks wooden pilasters and gate posts over time, which throws the gate leaf out of plane and makes it scrape the driveway. We address the structural cause, not just the symptom, usually by resetting the post or adding steel reinforcement.
- Unpermitted gate motor replacements flagged during city inspections. Beverly Hills enforces its own municipal permitting process for gate installations and major repairs, separate from LA County. City inspectors have been known to flag unpermitted gate motor replacements on grand estates during unrelated inspections. If a previous contractor installed a motor without a permit, the correction often costs more than the original job. We document what was installed and can advise on the compliance path before you spend anything.
Pricing for Gate Repair in Beverly Hills, CA
Most gate repairs in Beverly Hills fall into clear ranges. A hinge and post repair on a standard single swing gate typically runs $350 to $800. Electric gate repair that requires control board troubleshooting and limit-switch resetting typically runs $250 to $600. Weld and rust repair on ornate iron panels starts around $400 and runs upward of $1,500 depending on the extent of pitting and the amount of scrollwork. A full operator replacement on a heavy custom gate runs $2,200 to $5,000 including the motor, arm bracket, and programming to the existing smart-home system.
You will never see a range on our invoice that wasn’t on the written quote. The price is agreed before work starts. Call (213) 566-1045 and we’ll give you a flat written number for your specific gate, not a spread.
We Also Serve Cities Near Beverly Hills
We serve Gate Repair in Beverly Hills alongside neighboring communities including West Hollywood, Studio City, Sherman Oaks, and Santa Monica. The service and the written-price standard are the same in every city we cover.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Beverly Hills
Yes. Beverly Hills runs its own municipal permitting process for gate installations and major repairs, separate from LA County. Replacing a gate operator on an automatic driveway gate falls under that process, and city inspectors have flagged unpermitted replacements on large estates during unrelated inspections. We can advise on the compliance path and document the installation so the record is clean. Call (213) 566-1045 if you’ve inherited an unpermitted install from a previous contractor.
The daily marine layer carries salt-laden moisture inland from the Pacific, and Beverly Hills sits only about eight miles from the coast. That morning moisture settles on exposed iron scrollwork and hinge hardware, accelerating rust and pitting far faster than the drier inland air in Sherman Oaks. The fix is regular inspection of welds and hinges, plus prompt treatment of any pitted areas before they spread. We do that work and document what was treated with photos.
Usually the hinge post or the supporting pilaster is the root cause. In Beverly Hills, the seasonal cycle of marine-layer moisture followed by dry Santa Ana winds cracks and shifts wooden posts and pilasters, which throws the gate out of alignment. A hinge post that shifted a full inch is enough to burn out a FAAC operator over a few months. We check post plumb, hinge wear, and leaf weight distribution, then correct the structural issue rather than just re-hanging the gate. Call (213) 566-1045 for a written quote on the inspection.
Yes. We regularly work on Beverly Hills estates where the gate operator ties into Crestron, Control4, or Lutron, along with intercom arrays and multi-camera security integrations. The repair work often requires reading the control board, adjusting relay timing, and re-syncing the operator to the smart-home hub, not just swapping a motor. We document the programming settings before and after so the estate’s AV integrator has a clear record if they need to take over later.
Yes, most of the time. Original gates from the 1940s through 1970s in Beverly Hills were often one-off custom iron fabrications with no off-the-shelf replacement parts. We fabricate replacement sections, re-weld broken scrollwork, and rebuild hinge assemblies in our shop, then match the finish to the existing gate. The motor and control board are usually replaceable separately even when the iron is one-of-a-kind. Bring us a photo and we’ll tell you what’s repairable before you commit to anything.
Written by Adrian Vance, Owner at Vance Gate Repair North Hollywood, serving Beverly Hills since 2014.
Call (213) 566-1045 for a free estimate on gate repair in Beverly Hills. A live person answers 24/7, and you’ll get a written price before any work begins.