Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Hollywood
Gate installation in North Hollywood runs $1,850-$7,900 for most residential work, depending on whether you’re putting in a pedestrian gate, a sliding driveway gate, or a full security gate with automation. A standard single swing driveway gate with a new operator typically lands between $3,200 and $5,400, while slide gates on shared driveways run higher because of the track work and motor sizing involved. We quote every install in writing before any tool touches your property, and we do it fast: call (213) 566-1045 and a live person answers, 24 hours a day.
Why Vance Gate Repair North Hollywood Is North Hollywood’s Preferred Gate Installation Company
We’ve installed and repaired over 22,000 gates since Adrian Vance started this company in 2014, and North Hollywood jobs make up a meaningful slice of that number. What sets us apart on this side of the Valley isn’t a slogan. It’s the documentation. Every installation leaves you with a photo log of what we found, what we set, and what we installed, plus a written record of every part number. That’s Haven Standard Clause 4, and it means the next technician who touches your gate isn’t guessing at what came before.
Our crews know the apartment corridors along Lankershim, Vineland, and Cahuenga well enough to predict what they’ll find before they open the service panel: 1990s-era operators, crumbling stucco pillars, wiring that’s been cooked by a decade of Valley heat. North Hollywood customers call us because we name the actual problem and put the actual price on paper before work begins. No verbal handshakes. No surprise invoice at the end.
Response time to most North Hollywood neighborhoods is same-day for urgent safety issues, and we dispatch background-checked, uniformed technicians with their name and photo sent to you before arrival. For new installations, we schedule a free on-site measure, walk the site with you, and hand you a written scope and flat price. The quote is the price. Not an estimate that grows later.
Our Gate Installation Services in North Hollywood
We handle the full range of residential and light commercial Gate Installation work across North Hollywood fourplexes, bungalows, and apartment buildings. Every install starts with a free measure and ends with a photo record and a test cycle we do with you standing there watching.
Sliding Gate Installation
Sliding gates are the workhorse of North Hollywood shared driveways, because a swing gate needs room to arc and most of these narrow driveways don’t have it. We install rack-and-pinion slide gates with operators sized for the gate’s actual weight, not the optimistic spec on the box. On tight lots off Vineland and Cahuenga, a slide gate is often the only design that keeps the pedestrian path open while the vehicle gate cycles.
Pedestrian Gate Installation
Pedestrian gates on North Hollywood fourplexes get abused harder than almost any other hardware on the property. Tenants pull them, prop them open, and lean bikes against them all day. We install pedestrian gates with commercial-grade hinges and closers, set into fresh post footings when the existing pillar has cracked from years of heat cycling. The gate should close by itself, every time, without slamming.
Swing Gate Installation
Swing gates make sense on North Hollywood single-family bungalows where there’s a wide enough driveway apron. But we see a lot of swing gates that were hung on stucco pillars never designed for the weight, and within a year the gate sags and scrapes. We install swing gates on heavy-duty posts set in concrete footings, with operators from FAAC, BFT, or LiftMaster, and we set the travel limits precisely so the gate never over-travels into a car or a wall.
Security Gate Installation
Security gate installation in North Hollywood usually means something more than a driveway barrier. It often includes a pedestrian intercom, a keypad, and sometimes vehicle loop detection. We wire and program the access system as part of the install, and we photograph every connection before we close the panel. Under Haven Standard Clause 4, that photo record is yours and ours, filed with the job record.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We work on nine major gate-automation brands, so if you already have a FAAC operator on your North Hollywood gate, we don’t steer you toward a replacement you don’t need. That list includes FAAC, BFT, Linear, and Viking, among others, and we keep common parts for those brands stocked locally so a repair or install doesn’t stall waiting on a shipment from across the country. The right motor for your gate is the one sized for the gate’s physical weight and travel, not whichever one a supplier is pushing this quarter.
Common Gate Installation Problems We See in North Hollywood Homes
- Slide gates binding in their tracks during Santa Ana winds. Debris blows into the rack-and-pinion track, the motor strains, and the operator faults out or overheats. On new installs we set the track above grade and add a debris shield where the wind pattern merits it.
- Swing gates sagging on post-war fourplex pillars. Original surface-mounted weld-on hinges on stucco pillars were never built for Valley thermal expansion. The pillar cracks, the post pulls away, and the gate starts dragging. Our installs include new post footings and bolt-through mounting.
- Overheating operators from sustained 100°F+ summer heat. Automatic gate operators in North Hollywood run hotter than the same unit would in Studio City or Burbank, because this part of the Valley sits in a deeper heat sink. We size motors conservatively and set thermal protection so the gate doesn’t brick itself in July.
- Shared driveway gates faulting when loop detectors sit too close to crumbling asphalt. A loop detector placed near a decaying driveway edge triggers false opens, and tenants start propping the gate open to stop the cycling. We position loop detectors on stable ground and test sensitivity against actual vehicle passes.
Pricing for Gate Installation in North Hollywood, CA
Here’s what North Hollywood homeowners can expect in this market. A basic single swing driveway gate without automation runs $1,850-$3,200, including posts, hinges, and basic iron or aluminum construction. Add a FAAC or LiftMaster swing operator and you’re at $3,200-$5,400 total. A sliding gate on a shared driveway with a rack-and-pinion operator runs $4,200-$7,900 depending on gate length, track grade, and whether we’re replacing a crumbling post base at the same time. Pedestrian security gates with keypad or intercom access generally run $1,900-$3,800 installed.
What moves the number: gate width and weight, whether the existing post footings are salvageable, and whether you want vehicle loop detection or just a keypad. Every quote is free. Every price is written. You’ll sign off on the number before any work starts, and that number doesn’t change unless you change the scope. Call (213) 566-1045 to book a free measure.
Why Gate Installation in North Hollywood Has Specific Challenges
North Hollywood sits in the San Fernando Valley heat sink, where summer highs routinely hit 100-107°F, far hotter than the coastal side of the hill. That heat does two things to gates. It causes automatic gate operators to trip thermal protection and fail mid-cycle, and it makes steel and wrought-iron frames expand enough to bind slide gates in their tracks or warp swing gates out of alignment with their posts. On top of that, much of North Hollywood’s housing stock got its security gates during the late 1980s and 1990s, which means a large cohort of slide and swing gates is now 25-35 years old and reaching failure at the same time. If your gate’s post is original to that era, it was set before modern load specs even existed.
We also see a pattern that’s specific to North Hollywood’s apartment corridors along Lankershim and Vineland. The 1990s DoorKing pedestrian intercoms and gate operators were wired through stucco pillars with original aluminum conduit, and three decades of Valley heat cycling plus hard Valley water has corroded the conduit, cracked the stucco, and left the wiring brittle. A single apartment building can generate three to five separate gate service calls a year from that combination alone. When we install a new gate on those properties, we replace the conduit and re-anchor the post rather than bolting new hardware onto a pillar that’s already failing from the inside.
One job sticks with us. On a shared driveway off Cahuenga, we replaced a warped wrought-iron swing gate with a slide gate because the hinge post had pulled away from a cracked stucco pillar. Our crew used a rack-and-pinion drive with a new LiftMaster operator, poured fresh post footings, and added a safety photocell so the tenant’s pedestrian path stayed open the entire time we worked. That’s the kind of constraint we plan for on every North Hollywood install: shared driveways, rights of way, and pedestrian access that can’t just stop for a day.
We Also Serve Cities Near North Hollywood
We regularly run gate installation and repair calls into the neighborhoods around North Hollywood, including Studio City, Van Nuys, Burbank, and Sherman Oaks. The driving distance is short, but the gate problems differ enough that we plan each job against the specific site. If you’re in a neighboring city and you need a written quote, call (213) 566-1045 and we’ll get you on the schedule.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Hollywood
Yes. We convert swing gates to slide gates on North Hollywood shared driveways regularly. The slide gate runs parallel to the driveway on a ground track, so it uses almost no driveway apron width when opening. We check that the shared right of way stays clear during the install and set the travel limits so the gate stops short of any adjoining property line or parked vehicle. Call (213) 566-1045 for a free on-site measure and a written quote.
North Hollywood sits deeper into the San Fernando Valley heat sink than Studio City, and summer highs in this part of the Valley run 5-10°F hotter on the same day. Sustained 100°F+ ambient heat pushes operator motors closer to their thermal cutoff, and when the gate binds even slightly from track expansion, the motor trips. We size operators conservatively for North Hollywood installs and set thermal protection so the gate holds rather than lifting the limit mid-swing. A written quote is free: (213) 566-1045.
California requires entrapment protection on all automated gates, and North Hollywood installs follow the same code: photo-eyes, contact edges, or both, depending on the gate type. Slide gates need a monitored safety system that reverses the gate if anything interrupts the beam or touches the edge while closing. We install and photograph the safety system on every automated gate, which is part of Haven Standard Clause 4. For a code-compliant install with a written price, call (213) 566-1045.
We don’t mount anything to a pillar that’s already failed. We remove the cracked section, re-anchor the post into a new concrete footing, and sister any retained stucco so the finished install doesn’t depend on the old masonry. On North Hollywood apartment and fourplex work, this is usually the hidden cost in a gate replacement. We show it to you in the written scope before we start, with a photo of the existing pillar and a note on what we’re doing about it. Free estimates: (213) 566-1045.
Yes. We phase our installs so the pedestrian gate or a temporary pedestrian path stays open while the vehicle gate is being replaced. On North Hollywood fourplexes with a single walkway, we build the new pedestrian gate first, switch pedestrian access over, then take the vehicle gate out of service. That sequencing is part of the written plan we hand you before the job starts. Call (213) 566-1045 to schedule a free site walk.
Call for a Free Gate Installation Estimate in North Hollywood
If you’re in North Hollywood and you need a gate installed, a gate operator replaced, or a security gate upgraded with access control, call (213) 566-1045. A live person answers, 24/7. We’ll schedule a free measure, walk the site with you, and give you a written price before any work starts. Under Haven Standard Clause 1, that price is in writing and agreed before we pick up a tool. And under Clause 4, you’ll leave with a photo record of everything we did.
Written by Adrian Vance, Owner at Vance Gate Repair North Hollywood, serving North Hollywood and the surrounding Valley since 2014.