Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burbank
Gate installation in Burbank runs between $2,800 and $9,500 for most residential projects, depending on whether you’re looking at a standard swing gate or a heavy cantilever slide gate for a steep foothills driveway. We know Burbank differently than a general contractor would. The studio campuses, the post-war ranch homes, the hillside grades off Country Club Drive, all of it shapes what we spec on day one. Call (213) 566-1045 and a live person answers, not a voicemail queue. We’ll get a technician to your Burbank property with a written quote before any tool leaves the truck.
Why Vance Gate Repair North Hollywood Is Burbank’s Preferred Gate Installation Company
We work both sides of the same Burbank street. One morning we’re retrofitting a 1940s wrought-iron gate in the flats south of Burbank Blvd, the next we’re on an active studio lot off Riverside Drive installing a high-cycle slide operator with UL 325 compliance. That split, residential and studio-grade, is unique to Burbank. You won’t find it in Glendale or Pasadena. Our Gate Installation team carries what both worlds demand: light hardware for a Magnolia Park bungalow and heavy-duty steel for a Verdugo foothills driveway.
Adrian Vance started this company in 2014 after years on commercial access-control sites, and that habit never left. Every Burbank install leaves a photo log: the post footing before concrete, the limit switch reading after, the part number on the motor. Under Haven Standard Clause 4, you get that documented record at no charge. The price is written and handed to you before we start, under Clause 1. No handshake estimate, no invoice you didn’t see coming. A live dispatcher answers 24/7, so a 7 a.m. call from a homeowner whose gate failed overnight on Pass Avenue gets a real response the same morning.
Our Gate Installation Services in Burbank
Driveway Gate Installation
Most Burbank driveway gates land in the $3,200 to $7,800 range installed. That includes the welded steel frame, concrete post footings, hinge hardware, and the operator. We spec post depth for Burbank’s specific soil, not a generic 24-inch hole. In the hard rocky foothill soil above Kenneth Road, shallow footings lean within a year. We go deeper and use wider pads there. The result is a gate that closes square in year five.
Pedestrian Gate Installation
Pedestrian gates in Burbank run $900 to $2,400 depending on width and material. Homes in the Rancho District and along Griffith Park Drive often want a matched ped gate beside a new driveway gate, finished in the same powder coat. We build both at once rather than retrofitting a mismatch later. That also keeps the post spacing uniform, which matters more than it sounds when the latch has to meet the strike plate at exactly the same plane.
Sliding Gate Installation
A sliding gate in Burbank starts around $4,500 and can reach $11,000 for a heavy cantilever on a graded foothill lot. The track style slides on the ground; the cantilever style rides on offset rollers and never touches the pavement. For a steep driveway off Country Club Drive where debris and mudslides track across the opening each winter, we recommend cantilever. A grade-trained installer matters here. We’ve corrected more than a few spec errors from flat-valley companies.
Swing Gate Installation
Double swing gates remain the most common request across Burbank, from Toluca Lake driveways to the larger acreage lots east of the 5. Typical cost runs $4,000 to $8,500 for a paired system with operator. The hinge post is everything. Set in Burbank clay and hardpan without deep footings, that post will lean within the first twelve months, and the gate will bind against the latch. We pour deeper, brace wider, and photograph the footing before the concrete sets. That photo goes into your job file.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Burbank
We stock and install Viking and Ghost Controls operators for most residential Burbank installs, and DoorKing for anything that needs commercial-grade duty cycle. If you already have a motor on the property, we work with it rather than pushing a swap. On a Burbank studio-adjacent property, a DoorKing industrial slide operator is often the right call from day one. On a quiet Magnolia Park ranch, a Ghost Controls swing arm does the job without overbuilding. Nine automation brands are in our service scope. Whatever is already mounted on your post, we can read it, wire it, and document it.
Common Gate Installation Problems We See in Burbank Homes
- Post lean from shallow footings. Burbank’s foothill soil is rocky hardpan that resists digging and tricks contractors into short footings. A wide swing gate on short footings starts binding at the latch within months. We over-excavate and pour deeper, then document the hole before concrete goes in.
- Undersized operators on wide farm gates. Acreage entrances near the Verdugo foothills often get residential-grade 300-cycle motors. Under livestock and equipment traffic, those burn out in months. We spec the operator for the real duty cycle, not the cheapest fit.
- Solar systems starved by summer heat. Burbank routinely hits 100°F+, and solar gate batteries degrade faster here than in coastal LA. We size panels and battery banks for Burbank’s actual summer, and we add a hardwired override where possible.
- Safety sensors skipped on old installs. Many existing Burbank gates predate UL 325 photocell requirements. We won’t install an automatic gate without the safety edges and photo-eye. On a property with kids and animals, that’s the difference between a gate and a liability.
Pricing for Gate Installation in Burbank, CA
A standard single swing gate with one operator on a level Burbank lot runs $3,000 to $5,500. A double swing gate with paver drive and intercom starts at $5,500 and can hit $9,000. Cantilever slide gates on graded foothill driveways start at $6,000 and climb with span. Solar adds $1,200 to $2,800 depending on panel and battery sizing. Every quote is itemized: materials, footing depth, operator model, safety sensors, hours. You see the number before we start, and that number doesn’t move unless you change the scope. Call (213) 566-1045 and we’ll measure on site, free.
We Also Serve Cities Near Burbank
Our Burbank customers often refer us up and down the 134 corridor. We install gates regularly in North Hollywood, Studio City, Van Nuys, and West Hollywood, and we know which lots in each city present the same post-footing or grade problems we solve every week in Burbank. Dispatch runs from our Los Angeles office, and Burbank crews are local to the Valley floor.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Burbank
If your gate cycles more than 50 times a day, yes. Burbank’s studio-adjacent neighborhoods see gate usage that looks nothing like a quiet residential street. A standard residential operator rated for 20 to 30 daily cycles will wear out early. We recommend DoorKing or a heavy-duty Viking for properties near lot traffic, and we’ll confirm the actual cycle count with you before quoting. Call (213) 566-1045 and we’ll assess it on site, free.
Yes, but the panel and battery sizing matters. A shaded hillside lot off Country Club Drive or in the Verdugo foothills needs a larger panel array than a flat, open Magnolia Park driveway. Burbank’s summer heat also strains solar batteries, so we oversize the bank. We installed a Viking solar operator on a steep driveway where mains power was impractical. The original swing gate had sagged at the hinge post and the panel dragged on the uphill grade. Our crew poured a new post footing, squared the hinge post, and added a keypad entry and safety photocell. Two years later that gate cycles clean at a 15-degree grade. Call (213) 566-1045 for a site-specific solar quote.
We pour 36 to 48 inches for a wide swing gate in Burbank clay, with a wider pad than typical spec. Burbank’s clay expands when moist and contracts in summer heat. A 24-inch footing, which is common elsewhere in LA, is not enough for a 14-foot gate on this soil. We over-excavate, add rebar, and photograph the hole before pouring. That photo goes in your job file.
Yes, but only if the installer includes photocells, safety edges, and the right operator rating. UL 325 is the governing standard for automatic gates, and it’s not optional on a Burbank property with children and animals moving through the same opening. We install photo-eyes on both sides, pressure-sensitive safety edges on the closing panel, and an operator sized for your real duty cycle. Every visit ends with a photo log and a written record of the safety devices installed, under Haven Standard Clause 4.
Yes. A cantilever slide gate rides on offset rollers and never touches the ground, so there’s no track to clog with mud or debris from the Verdugo foothills. For a steep driveway where rainwater carries soil across the opening each winter, cantilever is the right configuration. We spec the counterweight for the gate’s full width and the grade’s rate of rise. Burbank’s hillside lots make this a common install for us. Call (213) 566-1045 and we’ll measure the grade and give you a written number.
Call Vance Gate Repair North Hollywood for Gate Installation in Burbank
Every Burbank install starts with a measurement, a written price, and a plan for the specific grade, soil, and usage pattern at your address. No verbal ballparks, no invoice that grows after the hole is dug. Call (213) 566-1045 and you’ll get a live person, a scheduled visit, and a written quote before any work begins. The 365-Day Done Right Promise covers every gate we install in Burbank.
Written by Adrian Vance, Owner at Vance Gate Repair North Hollywood, serving Burbank since 2014.
Gate Installation in Nearby Areas