Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in North Hollywood, CA | Vance Gate Repair North Hollywood
We provide independent Gate Repair in North Hollywood for Ghost Controls systems, and we do it differently than most shops. The one thing that separates our Ghost Controls work here is the written record: before we touch anything, you get a flat price in writing. After we finish, you get photos of every adjustment, every part number, and every limit-switch reading. Call (213) 566-1045 for a free estimate on Ghost Controls service in North Hollywood. We are not manufacturer-authorized, and we are honest about that up front.
Why North Hollywood Residents Choose Us for Ghost Controls Service
Ghost Controls is one of nine gate-automation brands our techs service every week, so we are not learning your opener on your dime. Adrian Vance, our founder, built his technical foundation at the New York City College of Technology before moving the operation west and spending the better part of a decade running gate calls throughout North Hollywood. That stretch includes a steady run of work on driveways and entry gates along the residential blocks near North Hollywood Park. Our trucks carry Ghost Controls-specific diagnostics, test boards, and mounting hardware, so we are not ordering parts after we arrive and making you wait another week. When we quote a Ghost Controls job in North Hollywood, the price is written before work starts, and the record is left with you when we leave. See our broader Ghost Controls sales & service page for what we cover valley-wide.
Common Ghost Controls Gate Repair Problems We Solve in North Hollywood
Ghost Controls openers are solid machines, but North Hollywood’s specific conditions expose a handful of predictable failure points. Here are the five we see most often, and what is actually causing them here.
- Control board thermal shutdown: When a Ghost Controls enclosure faces full afternoon sun, the board inside can trip its fail-safe and leave the gate standing open. On 107°F days, a black metal box on a stucco pillar easily exceeds the board’s operating limit. We install perforated vent boxes and sun shields so the enclosure stops cooking.
- Limit switch drift from heat cycling: Ghost Controls openers rely on limit settings to know where travel ends. Months of Valley heat expansion and contraction cause those settings to drift, so the gate slams into the end stop or binds mid-travel on a warped track. We reset and photograph the new readings.
- Through-beam photo eye false faults: The WAGO1 through-beam photo eye kit misaligns as stucco pillars shift with hard water intrusion and dry heat settlement. The gate thinks something is in the path and refuses to close. North Hollywood’s hard Valley water accelerates the corrosion at the mounting points.
- Noisy ram arms on tenant-heavy gates: Ghost Controls swing arms use internal rollers that wear faster when fine Valley dust gets past the seals. Apartment gates on Lankershim and Vineland see more cycles in a month than a single-family gate sees in a year, and without seasonal lubrication, the arms get loud.
- Heat-warped AXS1 lock housing binding the release: The AXS1 automatic gate lock sits outside in direct sun, and its housing can warp just enough to bind the solenoid. We straighten or replace the housing and test the release under load before we leave.
BeforeAfterGhost Controls Service in North Hollywood: What Local Conditions Mean for Your Equipment
Coastal Los Angeles does not test Ghost Controls equipment the way North Hollywood does. The full-sun asphalt-and-stucco corridors along Oxnard Street routinely push gate enclosures past Ghost Controls’ 140°F max operating temperature, a condition you simply do not see in Santa Monica or Venice. That means a Ghost Controls board that runs fine for a decade near the coast may cycle into thermal fail-safe every afternoon here. Our techs account for that before it becomes a problem: every metal enclosure we service gets evaluated for ventilation, and when it needs it, we add a perforated vent box or relocate the board to a shaded surface. This is not a generic upgrade. It is the specific fix for a specific North Hollywood condition, and it is in our written scope before we start.
Our North Hollywood service area coverage includes the apartment corridors, the bungalow streets, and the commercial driveways in between.
Ghost Controls Models & Products We Service in North Hollywood
Our techs service the full Ghost Controls line that shows up on North Hollywood properties: the TDS2XP heavy-duty dual swing gate opener, the HDP2 single swing opener, the AXS1 automatic gate lock, and the WAGO1 through-beam photo eye kit. For parts, we lean genuine Ghost Controls boards and gearboxes on almost every repair. Aftermarket linear actuators and control cards do not survive Valley heat cycling, and we would rather tell you that up front than sell you a part that fails in August. For out-of-production Ghost Controls models, we walk you through the math: whether our Gate Installation in North Hollywood beats continued patchwork on 20-plus-year-old hardware. The written quote lays out both options in dollars.
Ghost Controls Service Pricing in North Hollywood
Ghost Controls repair pricing in North Hollywood runs along these lines, and every one of these is a flat quote you receive before work begins:
- Diagnostic service call: $89, applied toward the repair if you proceed.
- Photo eye alignment or replacement: $120-$240, depending on whether we are aligning the existing WAGO1 or installing a new sensor.
- Limit switch reset and track realignment: $140-$220, including photographic record of the new settings.
- Motor arm rebuild or replacement (single gate): $380-$680, depending on whether the gearbox is salvageable.
- Control board replacement with sun shield: $290-$480, including the vented enclosure if thermal shutdown is the cause.
- Full motor kit upgrade (out-of-production models): $900-$1,800, quoted in writing with parts and labor separated.
The estimate is free, and the price you agree to is the price you pay. No invoice at the end with a number you did not see coming. Call (213) 566-1045 for an exact quote on your Ghost Controls opener, and we will put it in writing before any work starts.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in North Hollywood
The Ghost Controls control board is overheating inside its enclosure. When the internal temperature exceeds the board’s limit, it trips fail-safe and commands the gate open. A black metal enclosure in full North Hollywood sun reaches 140°F or more. The fix is ventilation or relocation, and we will show you photos of exactly where the board was and where it now sits. Call (213) 566-1045 and we will check it before the next heat wave.
Yes, and we do this regularly on the older fourplexes along Lankershim and Vineland. The Ghost Controls board has a dry-contact release input, and we wire the existing intercom or phone-entry relay into that point. We document the wiring with diagrams and photos so the next tech does not have to reverse-engineer it. The written scope includes the integration path before we touch the wires.
The WAGO1 through-beam photo eye mounts are shifting. Santa Ana winds funnel through the Valley with enough force to flex gates and rattle stucco pillars, and a photo eye that moves half an inch produces a false obstruction fault. We align the beam, tighten the mounts, and photograph the final position. On some pillars with crumbling stucco, we add a backing plate so the mount has something solid to hold. Estimates for this are free.
Depends on the failure and the condition of the rest of the hardware. We give you a written breakdown: the repair cost, the replacement cost, and the expected remaining life of the unit. If the gearbox is worn and the board is cooked, a motor kit upgrade often makes more sense for a rental property than three separate repair visits. But if the arm is solid and only the board failed, repair is usually the better call. We will show you both prices in writing, and you decide.
Thermal expansion. The gate frame and the track are different metals, and they expand at different rates when the temperature climbs past 100°F. The afternoon bind is the gate physically too large for its track. We re-set the gate in the track with cold-morning clearance and confirm the slide and limit settings at temperature. It is a North Hollywood-specific fix that has to be done when the gate is hot, or it will not hold. Call (213) 566-1045 for a free estimate.
Service Areas Near North Hollywood
From our North Hollywood base, we run Ghost Controls calls into the surrounding neighborhoods. That includes Ghost Controls service in Studio City to the south, Ghost Controls service in Burbank to the east, plus Van Nuys and Sherman Oaks. If you are anywhere in the central Valley and running a Ghost Controls opener, we will come to you.
Book Your Ghost Controls Service in North Hollywood Today
Call (213) 566-1045 and a live person answers, at any hour. We will schedule the visit, name the technician before arrival, and hand you a written price before anything gets touched. Ghost Controls openers in North Hollywood do not fix themselves, and the heat is not waiting.
Written by Adrian Vance, Owner at Vance Gate Repair North Hollywood, serving North Hollywood since 2014.