Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across West Hollywood
Gate installation in West Hollywood runs $2,400-$8,500 for a typical swing gate with automation, and $3,800-$12,000 for a sliding gate, depending on the driveway grade, gate material, and what the existing posts can support. We serve all of West Hollywood, from the courtyard apartments off Santa Monica Boulevard to the hillside driveways above Sunset, and we quote every job in writing before any work begins. Call (213) 566-1045 for a written estimate.
West Hollywood is a tricky market for gate work, and we don’t say that lightly. The city has its own Building & Safety division, separate from the City of Los Angeles and LA County, and a permit pulled from the wrong jurisdiction will bounce. You’d be surprised how many out-of-area contractors learn that on your dime. We know WeHo’s process because we work it every week, and our Gate Installation team pulls permits correctly the first time.
Why Vance Gate Repair North Hollywood Is West Hollywood’s Gate Installation Choice
We’ve been at this since 2014, founded by Adrian Vance out of commercial access-control work, and that background shapes how we handle residential gates in West Hollywood. Where most installers give a verbal estimate and a handshake, we hand you a written scope and a written price before anyone picks up a tool. That’s Haven Standard Clause 1, and it applies to every job we do in WeHo, from a pedestrian gate on a bungalow court near Plummer Park to a double swing gate on a hillside parcel off Doheny Drive.
What West Hollywood homeowners tell us they value most is the documentation. Every visit ends with a photo log of what we found, what we set, and what we installed. If a previous tech guessed at a limit switch, you’ll see the exact position we photographed before and after. Adrian Vance developed that habit on commercial access-control sites starting in 2014, and we’ve carried it onto every residential driveway gate since. Under Clause 4 (Evidence on every job), that photo record is standard on every visit at no additional charge.
We also service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in West Hollywood specifically because so many properties have legacy operators from the 1990s that a brand-exclusive installer would push to replace. We’d rather fix what’s fixable and be honest when replacement is cheaper. A live person answers 24 hours a day at (213) 566-1045, no voicemail loop.
Our Gate Installation Services in West Hollywood
Sliding Gate Installation
Sliding gates are the workhorse of West Hollywood’s courtyard apartments and hillside driveways, where space is tight and a swinging panel would eat half the driveway. We install cantilever and V-groove track systems, sized for the actual grade. Streets above the Sunset Strip have steep slopes that put constant lateral load on bottom rollers. A flat-lot quote on a hillside driveway is almost always under-quoting parts and labor. We account for that.
Swing Gate Installation
Single-family homes in West Hollywood, especially the stucco and ornamental iron properties owned by entertainment-industry buyers, lean heavily on swing gates with high-end operators and intercom integrations. We install single and double swing gates, set posts to depth for the marine-layer soil conditions, and spec operators rated for the panel weight. A rust-jacked hinge post on an old iron gate near the coast will sag a new panel within weeks. We check the post before we hang anything.
Pedestrian Gate Installation
Bungalow courts and multi-unit blocks throughout West Hollywood need pedestrian gates that work with the existing intercom and access-control systems, which are often as old as the building. A 1920s courtyard on Harper Avenue with aging intercom wiring usually needs a control board swap alongside any new gate. We install pedestrian gates sized to the entry width and slung to handle daily traffic, not occasional use.
Driveway Gate Installation
A driveway gate in West Hollywood is effectively standard equipment, not a luxury, given the density and privacy demands of the area. We install ornamental steel, composite, and wood infill gates, always built around the operator that will actually serve the property long-term. No point installing a heavy iron panel with an operator that can’t hold it on a slope. We spec them together from the start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in West Hollywood
We work on whatever motor is already on the property rather than steering you toward a replacement. That includes DoorKing, a common sight on older West Hollywood apartment gates, and Elite operators, which show up frequently on hillside driveway installations. Viking and Ghost Controls appear on many single-family systems in the area. We stock common parts for these brands locally, which means a failed control board doesn’t have to wait three days on a courier from a distributor across the country. Faster turnaround, same written pricing.
Common Gate Installation Problems We See in West Hollywood Homes
- Obsolete control boards on 1990s operators. A LiftMaster or DoorKing board from that era often can’t accept modern safety photocells, and retrofitting is a losing game. Replacing the operator is usually cheaper than nursing a board that predates current UL 325 safety requirements.
- Rust-jacked hinge posts near the marine layer. The morning damp that rolls in from the Pacific keeps hinge pins and posts in a persistently moist environment. Once a post is corroded through, a new gate panel alone will sag in weeks. The post has to be cut out and replaced first.
- Steep driveway grades above Sunset killing slide-gate rollers. Hillside parcels off streets like Miller Drive and rising toward Laurel Canyon put downhill load on slide-gate drives. Bottom rollers and V-groove tracks wear fast. We spec heavier rollers for hillside installs.
- Narrow shared driveways on 1920s courtyard properties. Most of West Hollywood’s building stock is courtyard apartments with tight clearances. A swing gate that works on a wide Brentwood lot physically won’t fit a shared WeHo driveway. We measure and design for the actual space, not the ideal one.
Pricing for Gate Installation in West Hollywood, CA
Here’s what you can expect in this market. A typical single swing gate with automation in West Hollywood runs $2,600-$6,800 installed, depending on gate material, operator brand, and whether the existing post is sound. A slider on a flat lot runs $3,800-$9,500. A hillside slider off Doheny Drive or above Sunset will push higher, $5,500-$12,000, because of the heavier rollers, deeper post footings, and grade compensation. Pedestrian gates run $1,200-$4,000. A 1990s operator swap with new safety photocells typically lands between $1,800 and $3,400.
What changes the price: gate weight, driveway grade, permitting, post condition, and whether we’re pulling wire for new intercom or access control. None of that is a surprise. We quote it in writing before work starts, so you see the exact number. Call (213) 566-1045 for a free estimate and we’ll send a uniformed technician to measure and price the job on site.
We Also Serve Cities Near West Hollywood
From our Los Angeles dispatch office, our crews cover West Hollywood directly, and we regularly install gates for customers in Beverly Hills, Studio City, North Hollywood, and Sherman Oaks. If you’re just over the city line, give us a call and we’ll tell you honestly whether the job fits our schedule. Same written pricing, same documentation standard.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in West Hollywood
In most cases, yes. A 1960s courtyard gate panel is often fine, but the operator and control board are the tired parts. We swap the operator, add a modern loop detector and safety photocells, and keep the existing panel if the posts and hinges are sound. When a post is rust-jacked or the panel’s rusted through, replacing the panel is cheaper than repairing it twice. We’ll show you the condition in photos before you decide. Call (213) 566-1045 for a written quote.
Yes, and it’s the city’s own Building & Safety division, not LA City or LA County. We pull the permit through the correct jurisdiction every time, and the permit cost is itemized in your written quote. An out-of-area contractor who pulls from the wrong office will leave you with an unpermitted installation, which can complicate a future sale or insurance claim. This is one of the single biggest West Hollywood-specific compliance issues we see.
Because a steep driveway puts constant lateral load on the bottom rollers and V-groove track. A flat-lot contractor quotes standard rollers, installs them, and the gate drags and burns out the motor within a couple of years. We spec heavier-rated rollers and set track alignment to account for the downhill drift. It costs more up front and saves money by the third year. Call (213) 566-1045 and we’ll measure the grade and quote it accurately.
Usually no, because a 1990s control board typically can’t accept modern safety photocells. The board lacks the input circuit. In that case we replace the operator with one that meets current UL 325 safety requirements, and we add the photo-eyes as part of the install. Trying to wire modern sensors into an obsolete board creates a safety liability. We’d rather do it right.
The marine layer keeps gate hardware damp through most mornings, which accelerates rust on rollers, tracks, hinge pins, and operator housings far more than drier areas a few miles east. For a new installation we specify powder-coated or galvanized hardware where it contacts the ground or faces the street, and we set post footings with proper drainage. Then the Santa Anas hit in fall and crack rubber seals while steel expands. Both conditions are part of why we document everything photographically.
If you’re weighing a new gate or trying to save an old one, call (213) 566-1045 and we’ll send a background-checked, uniformed technician with the price in writing before any work starts.
Written by Adrian Vance, Owner at Vance Gate Repair North Hollywood.