Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for North Hollywood Homeowners
A professionally installed Driveway Gate or pedestrian gate in North Hollywood typically costs between $3,800 and $12,400 for a complete setup, including the gate itself, posts, hardware, and the motor or closer if applicable. Most single swing-gate installations in the North Hollywood area land between $4,200 and $7,800, while double gates and sliding gates run higher because they require more steel, more concrete, and more precise alignment work. Vance Gate Repair has installed and repaired over 22,000 gates since 2014, and every installation we do in North Hollywood starts the same way: a written price handed to you before any tool comes off the truck.
We know a gate is more than curb appeal. A driveway gate in North Hollywood is often a property line, a barrier against package theft, and the first thing you operate every morning. When it sags, sticks, or is missing entirely, the problem is not theoretical. Our team is licensed and insured, and a live person answers at (213) 566-1045 around the clock when you are ready to talk about what a new gate should cost and how fast it can go in.
What Our Gate Installation Service Includes
Every gate installation we complete in North Hollywood follows The Haven Standard, which our founder Adrian Vance developed during his commercial access-control work beginning in 2014. That means a written scope, a written price, and photographic evidence before, during, and after the job. Here is what that looks like for each gate type.
Driveway Gate
A driveway gate is the widest gate on the property and usually the one you will automate. For Gate Installation in North Hollywood, driveway gates are commonly built in steel or aluminum with a height between five and seven feet, and the installation includes setting the posts in concrete, hanging the gate leaf or leaves, and aligning the hinges so the gate does not sag after the first season of heat and rain. Vance Gate Repair North Hollywood handles the full build, from the first measurement to the final coat of paint or powder, and we photograph the post depth before concrete goes in so you have a record of what is underground.
Pedestrian Gate
A Pedestrian Gate is the smaller, people-only gate that lets you check the mail or walk to the driveway without opening the full vehicle gate. These gates are often installed alongside a larger driveway gate, and the critical part is getting the latch and closer aligned so it does not slam in the wind or fail to catch. We install pedestrian gates in North Hollywood as standalone projects and as part of a full driveway package, and we set the reveal, the gap between gate and frame, to a tolerance most builders do not measure.
Sliding Gate
A sliding gate travels sideways along a track instead of swinging out, which makes it the right choice for North Hollywood driveways that slope upward from the street or have limited setback, meaning there is not enough flat ground for a swing arc. Sliding gate installation requires a level track run, a cantilever or wheeled support system, and often a concrete pad for the motor and receiver post. We install sliding gates with proper end stops and travel limits so the gate does not slam into the fence line, and we photograph the track bed, the wheel alignment, and the limit-switch settings before we call the job done.
Swing Gate
A swing gate pivots on hinges mounted to posts and is the most common gate style in North Hollywood because it works with almost any driveway that has flat approach space. Single swing gates are simpler to hang, but double swing gates require the two leaves to meet perfectly in the center while both motors, if automated, open and close at the same rate. Vance Gate Repair North Hollywood sets swing gates with threaded hinge adjustments rather than welded-only hinges wherever possible, so you can correct minor settling without cutting and re-welding the gate a year from now.
Double Gate
A double gate, sometimes called a bi-parting gate, is two leaves that meet in the middle and open from the center outward or inward. North Hollywood properties with wider driveways, RV access, or larger vehicle turn radii typically need a double gate because a single leaf that wide would be too heavy to swing safely. We install double gates with steel stiffening ribs, adjustable center stops, and matched operator arms on both leaves so the gate opens evenly even when one side faces more wind than the other.
Security Gate
A security gate is built with the same structural elements as any driveway gate, but it is specified for force resistance, taller profiles, tighter picket spacing, and sometimes integrated access control from day one. In North Hollywood, homeowners near major streets or alley-facing lots often want a security gate with a maglock or a heavy-duty electric strike, plus a call box or keypad. Vance Gate Repair North Hollywood installs security gates with the same documentation standard we use on light commercial jobs: wiring diagrams for every low-voltage connection, photo logs of every component, and a written record of what was installed and how it is configured.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and automate gates using the equipment that is already on the property or the brand that fits the job, not the brand we have the most inventory of. That matters in North Hollywood, where a driveway gate may have been installed by a previous owner using a DoorKing motor that is still perfectly functional, or a Viking operator that just needs a new install around it. We work with DoorKing, Viking, Ghost Controls, and Elite systems regularly, and we know their mounting patterns, their limit adjustment methods, and their common failure points in Southern California heat.
If you are installing a new gate with automation, we will recommend the operator that matches the gate weight and cycle frequency, and we will show you the spec sheet before we order anything. Whether you have one of those four brands or something else entirely on the property, we can install around it or replace it without steering you toward a full system you do not need.
BeforeAfterSigns You Need Gate Installation Right Now
- Your gate posts are moving in the concrete. If you can rock a gate post by hand, the concrete footing has failed or was never deep enough. In North Hollywood soil, which is mostly sandy loam over clay, a shallow post will work loose within a few wet winters. A new installation with deeper footings is the only fix that does not come back.
- The gate drags on the ground every afternoon. A gate that scrapes the driveway in summer but not in the morning is expanding with the heat. That is a sign the gate was not built with proper clearance for the local temperature swings, and the hinges are likely already deformed. A new gate with correct thermal clearance solves the problem permanently.
- You are parking your car outside because the gate no longer opens. When the gate mechanism fails and the gate is stuck closed, you lose access to your own driveway. If the motor is obsolete and the gate itself is over 15 years old, installing a new gate system is often less expensive than repairing a decayed frame and then replacing the motor six months later.
- The gate has been hit by a vehicle. A bent gate leaf is not just ugly. The stress concentrates at the hinge welds and the picket intersections, and the gate will eventually crack there, often while someone is moving it by hand. Replacement is cheaper than repairing a gate that has lost its structural integrity.
- There is no gate at all, and you have already installed the opener. We see this in North Hollywood when a homeowner buys an operator, posts, and a gate kit, then realizes the pieces do not match or the post spacing is wrong. Starting fresh with a measured installation is faster and cheaper than retrofitting mismatched parts.
Our Gate Installation Process - Step by Step
Most gate installations in North Hollywood are completed in one to three days depending on the gate type, the concrete work involved, and whether automation is included. Here is exactly how the work goes.
- 1
Measure and written quote. We come to the property, measure the driveway opening, check the soil at the post locations, and note any slope, drainage, or overhead clearance issues. Before we leave, you get a written line-item price for the entire job. That price is honored, not revisited after the posts are dug. Under Haven Standard Clause 1, the price is written and handed over before any work starts.
- 2
Post excavation and concrete. We dig to the depth required for the gate weight and North Hollywood soil conditions, typically 36 to 48 inches, and set the posts in concrete. We photograph the hole depth and the post placement before concrete goes in, and we set the posts plumb with a laser level, not just a bubble level.
- 3
Gate fabrication and mounting. The gate is built to the measurements taken on day one, then hung and aligned. We adjust the hinges, the reveal, and the latch so the gate swings or slides with even effort, and we set the drop rod or center stop where the gate rests when closed.
- 4
Automation integration. If the gate is automated, we mount the operator, set the travel limits, and align the safety photo-eyes, the infrared beam that stops the gate if anything crosses the path. We run the gate through a full open-close cycle under load and record the limit-switch settings in the job file.
- 5
Walkthrough and documented record. Before we leave, we walk the gate with you, demonstrate the operation, and hand over a photo log of what was installed, what was set, and what the wiring looks like. That record stays in our files and with you, so the next technician who touches the gate is not guessing. This is Clause 4 of The Haven Standard: evidence on every job.
How Much Does Gate Installation Cost in North Hollywood?
The most common Gate Installation pricing we quote in North Hollywood is for a single swing driveway gate in steel or aluminum, and that typically runs between $4,200 and $7,800 including posts, hardware, and basic paint or powder coat. A double swing gate on the same driveway runs $6,500 to $12,400 because you are paying for two leaves, a center stop, and usually two operators. Sliding gates trend higher, $5,800 to $11,000, because of the track work and the longer fabrication time. A pedestrian gate alone is the lowest-cost option, usually $1,400 to $3,200 installed without a motor.
What moves the price in North Hollywood is gate width, gate weight, automation, and access. A 20-foot double gate is not simply twice the price of a 10-foot single, it requires a heavier post section and a more powerful operator. Permits are not generally required for a like-for-like gate replacement on an existing driveway in the city of Los Angeles, but if the gate is new construction or the posts are going into a new location, we will flag the permit question during the quote. The free estimate includes a written line-item breakdown so you can see exactly where the money goes, and the price we quote is the price you pay. A Gate Installation in Studio City job follows the same pricing structure, though access and slope can vary.
If you already have a written estimate from another company, bring it. We will review it line by line at no cost and tell you honestly whether it is fair, and our own bid will be written to the same scope so you can compare them side by side.
Gate Installation Near North Hollywood - Our Service Area
Vance Gate Repair provides gate installation across North Hollywood and the surrounding San Fernando Valley and Los Angeles areas. We serve Studio City, Burbank, Van Nuys, Sherman Oaks, West Hollywood, Beverly Hills, Encino, San Fernando, Reseda, Tarzana, and greater Los Angeles. The average home gate project in the Valley is scheduled within five to ten business days of the written quote, and installations in Burbank and North Hollywood proper are often on the shorter end of that window. Our shop is set up to handle the full fabrication and finishing process in-house, so we are not waiting on a third-party gate supplier.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in North Hollywood
Gate installation is the complete process of measuring a driveway or walkway opening, setting the posts in concrete, hanging or sliding the gate leaf, and installing any automation, access control, or safety equipment. In North Hollywood, it usually includes excavation, fabrication, mounting, and testing. The job is finished when the gate opens and closes properly and you have a written record of what was installed.
Most single swing gate installations take one full day from excavation to final walkthrough, and most double and sliding gates take two to three days. If automation is included, the operator is usually installed on the same day as the gate, though concrete curing time can extend the schedule for larger gates. We give you a written installation schedule at the time of the quote, and we hold to it.
A complete gate installation in North Hollywood typically costs between $3,800 and $12,400, with most single gates landing in the $4,200 to $7,800 range. The price depends on gate type, width, material, automation, and whether the existing posts can be reused. Your written quote includes a line-item breakdown, and the price does not change after the work begins. Call (213) 566-1045 for an exact figure on your specific driveway.
Yes. We install gates and operators from Viking, Ghost Controls, DoorKing, Elite, and other major brands, and we will integrate new gate hardware with the existing automation whenever it is safe and practical. If your existing operator is in good condition, we will not push a replacement. The brand conversation happens during the quote, and we will show you the spec sheet before we order anything.
For safety-critical situations, such as a gate that has fallen or a security gate that no longer closes, we prioritize those jobs and can often dispatch a technician the same day you call. A live person answers at (213) 566-1045 around the clock, so you will not go to voicemail. For a planned installation, we schedule at your convenience with a fixed written price confirmed before the crew arrives.
Every gate installation we perform in North Hollywood is covered by our 365-Day Done Right Promise. If the installation is not right, we make it right within the year, no argument and no additional fee. This is a written commitment under The Haven Standard, and it covers the workmanship and the parts we install. Manufacturer warranties on gate operators are separate and we will walk you through them during the quote.
Clear the area around the driveway opening, move any vehicles that would be blocked by the gate work, and trim back any plants or shrubs within three feet of the proposed post locations. If you have a home automation system or an existing intercom, have the relevant login or manual available so we can integrate the new gate. We will confirm the preparation checklist in writing before installation day, so you will not be guessing.
Schedule Your Gate Installation Service in North Hollywood Today
If your gate is missing, failing, or simply overdue for replacement, call (213) 566-1045 and tell us what you are working with. You will get a straight answer from a live person, a written price before any work starts, and a documented record when the job is done. Estimates are free, and the price we put in writing is the price you will pay.
Written by Adrian Vance, Owner at Vance Gate Repair North Hollywood, serving North Hollywood since 2014.