Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pasadena
Gate repair in Pasadena usually costs between $275 and $1,800 depending on what failed: a hinge rebuild, a bent frame from wind, a burned-out operator, or a cracked pilaster. We dispatch crews to Pasadena daily, and a live person answers the phone at (213) 566-1045 every time you call, any hour. We carry parts for Viking, Ghost Controls, DoorKing, and Elite operators on our trucks, so most automatic gate repairs in Pasadena finish same-day. You get a written price before we touch anything, and a photo record of what we found and fixed before we leave.
Why Vance Gate Repair North Hollywood Is Pasadena’s Preferred Gate Repair Company
We work on gates that most general contractors won’t touch: 12-foot ornamental wrought iron swing gates on South Orange Grove, Craftsman-era redwood driveway gates in Bungalow Heaven, and automated estate gates mounted on aging masonry pilasters that have shifted for decades. Pasadena’s housing stock is not like the rest of the San Gabriel Valley. The ironwork is older, heavier, and often protected by historic design review rules that forbid off-the-shelf replacements. Our Gate Repair team knows which repairs trigger Historic Preservation Commission review and which ones don’t, and we document every adjustment with photographs and written notes so the next technician never has to guess what was done.
Adrian Vance started this company in 2014 doing commercial access-control documentation, and that habit carried over: every Pasadena job gets a written scope, a written flat price, and a photo log left with the homeowner. We don’t give verbal estimates. We hand you a number in writing before any tool comes off the truck. That’s Clause 1 of our Haven Standard, and it applies to every repair in Pasadena, from a simple hinge replacement to a full operator rebuild.
Our Gate Repair Services in Pasadena
Electric Gate Repair
Electric gate repair in Pasadena typically runs $325-$950, covering control board diagnostics, limit switch adjustment, photo-eye realignment, capacitor replacement, and wiring repairs. On older Pasadena estates, we regularly find original wiring that predates current code, spliced multiple times and degraded by decades of Santa Ana-driven vibration. We trace the full circuit, mark every splice and reading, and photograph the final state. You get the evidence, not just a bill.
Automatic Gate Repair
Automatic gate repair in Pasadena runs $300-$1,400 depending on the operator brand and what failed. Gearboxes wear out. Limit switches drift. Control boards cook in the summer heat. We service all nine major brands, including Ghost Controls, DoorKing, Elite, and Viking, and we don’t steer you toward replacing a motor that can be rebuilt. If your operator stops mid-cycle or reverses on hot days, call us. We’ll diagnose it in writing.
Hinge & Post Repair
This is the repair we do most often in Pasadena. Heavy ornamental gates hang on hinges that take enormous load, and when a hinge post shifts even a quarter inch, the gate sags and binds. Hinge and post repair in Pasadena runs $400-$1,600. On South Orange Grove, we’ve rebuilt brick pilaster footings cracked by tree root pressure, fabricated period-style hinge posts to match the original ironwork, and rehung gates weighing over 600 pounds. The gate wasn’t the problem in most of these cases. The post was.
Gate Realignment
Gate realignment in Pasadena costs $275-$650 for most properties. Santa Ana gusts channeled down from the San Gabriel Mountains bend frames, shift hinges, and knock gates a few degrees out of travel. A gate that drags on the driveway, scrapes the post, or won’t close fully usually just needs the frame straightened, the hinges reset, and the operator limits reprogrammed. We do that in one visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Pasadena
One company, nine brands. We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Pasadena property already has a DoorKing swing operator or a Viking ram arm, we won’t pressure you to replace it with something else. We stock common boards, limit switches, capacitors, and photo-eyes for these brands on our trucks, which is why most automatic gate repairs in Pasadena finish in a single trip. We fix the motor you have.
Common Gate Repair Problems We See in Pasadena Homes
- Wind-torqued frames and snapped welds. Pasadena sits at the mouth of the San Gabriel Mountains, which funnels and amplifies Santa Ana winds. Residential gusts above 50-60 mph bend ornamental iron swing gate frames and snap welds along the hinge line. This is the single most common emergency call driver in the city.
- Cracked and leaning masonry pilasters. Along South Orange Grove Boulevard, heavy wrought iron gates are often mounted on brick or concrete pilasters whose footings were never engineered for the area’s massive mature trees. Root pressure and shallow pours make the post lean or crack, and the gate cannot be rehung correctly until the masonry is rebuilt first.
- Rust-pitted hinges and sagging redwood panels in Bungalow Heaven. The Craftsman bungalows in Bungalow Heaven Landmark District often retain original redwood driveway gates now 80-110 years old. Intense summer UV and dry heat accelerate rust pitting on iron hinges and stress-cracking on the wood panels themselves.
- Operator failures after heavy rain. Pasadena gets most of its rain in short, intense winter bursts. Water intrusion into underground operator housings, junction boxes, and photocell conduits causes sudden failures after years of trouble-free operation. We open, dry, test, and reseal every connection, then photograph the final state.
Pricing for Gate Repair in Pasadena, CA
A typical hinge and post repair in Pasadena runs $400-$1,600. Gate realignment runs $275-$650. Electric gate repair runs $325-$950, and full automatic gate operator replacement runs $1,200-$3,800 depending on the brand, the arm type, and whether new safety photocells and conduit runs are required. Weld and rust repair on ornamental iron gates runs $350-$1,100, including grind-out, re-weld, and matched primer and paint. You get a written flat price before any work starts. No hourly billing. No verbal estimate that creeps. Call (213) 566-1045 and we’ll give you an exact figure after we look at the gate.
We Also Serve Cities Near Pasadena
Vance Gate Repair serves Pasadena and the surrounding area, including Burbank, North Hollywood, Los Angeles, and West Hollywood. If you’re just outside Pasadena, call us. We schedule by neighborhood, not by distance, and our Pasadena crews already know the gate styles and common failures throughout the San Gabriel Valley.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pasadena
Because the gate is probably fine, and the mounting posts are moving. Pasadena’s position at the base of the San Gabriel Mountains funnels Santa Ana gusts down to residential street level, regularly producing 50-60 mph winds that push against a 10- or 12-foot ornamental gate like a sail. The hinge posts take that full load. If the post footings are shallow, undersized, or cracked from mature tree root pressure, the post flexes a few degrees and the gate sags within days. We’ve fixed this on South Orange Grove by rebuilding the pilaster footing, resetting the hinge post, and rehanging the gate with new bearing hardware. If your gate won’t stay aligned, the post is usually the problem, not the gate. Call (213) 566-1045 and we’ll inspect both.
You can repair it freely in almost all cases; replacement requires design review. Bungalow Heaven is a designated Landmark District, which means the exterior of contributing structures, including driveway gates visible from the street, falls under the city’s Historic Preservation Commission design review when replacement or major alteration is proposed. Repairs that keep the existing ironwork and wood in place, like hinge rebuilding, frame straightening, weld repair, and repainting in the original palette, generally do not trigger review. Replacing the gate with a new one does. If you live in Bungalow Heaven and your gate is original, we recommend repair and restoration first. We document the repair thoroughly with before and after photographs and written notes, which helps if you ever need to show the city what was done. Call (213) 566-1045 for a free assessment of your gate and its repair options.
No, and it’s usually one of two things. Pasadena’s intense summer dry heat can push a control board past its thermal tolerance, especially if the operator housing faces direct afternoon sun. We see thermal shutdown on older boards on South Orange Grove and in the hillside neighborhoods where there’s no shade cover. The other common cause is a failing gearbox that binds when the lubricant thins, which trips the obstruction sensor. Both are repairable without replacing the whole operator. We stock boards and gear kits for multiple brands and can usually resolve it same-day. Call (213) 566-1045, and we’ll diagnose it in writing.
Because Pasadena gets its rain in short, intense bursts, and water finds every unsealed conduit, junction box, and underground operator housing. If the operator is buried, even a few inches of pooled water around the housing can short the motor windings or the limit switch circuit. If the photocells are wired through a junction box that’s never been resealed, water intrusion corrodes the terminals and the operator fails the next time it tries to run a cycle. We open, dry, test, and reseal every connection, then photograph the final state so you have a record. This is one of the most common repairs we make in Pasadena after winter storms. Call (213) 566-1045.
A professional inspection covers four things: the photo-eyes at the gate travel path, the reverse-edge or contact sensors on the gate leaf itself, the force settings on the operator, and the warning signage. Since 2014, every Vance Gate Repair job has included a documented photo and wiring check of the safety system, per Haven Standard Clause 4. If your gate doesn’t reverse when something crosses the path, or the force setting is high enough to trap a child or pet, it fails. We test and photograph each of those elements on every visit, and we’ll tell you in writing if anything doesn’t pass. Call (213) 566-1045 to schedule a safety inspection. Estimates are free.
How We Work on Pasadena Estate Gates
On a South Orange Grove Boulevard estate, our crew found a 12-foot ornamental wrought iron swing gate with a Viking operator that had blown off its lower hinge post during a 60-mph Santa Ana gust, twisting the gate frame and cracking the brick pilaster footing. We cut out and rebuilt the post footing, fabricated a new period-style hinge post, welded and straightened the frame, realigned the gate, and reprogrammed the Viking operator with fresh safety photocells and keypad entry so the gate swings silently and holds alignment. That’s the kind of repair that can’t be done by a general handyman and can’t be quoted over the phone. It takes a specialist, and it takes documentation. We do both.
Call Vance Gate Repair for Gate Repair in Pasadena
If you have a gate that’s sagging, jamming, reversing on its own, or making noise it didn’t make last month, call us at (213) 566-1045. A live person answers, day or night. We’ll dispatch a background-checked, uniformed technician to your Pasadena property, give you a written flat price before any work starts, and leave you with a photo record of what was found and what was fixed. That’s the Haven Standard: a written scope, a written price, and photographic evidence on every visit. Every repair is covered by our 365-Day Done Right Promise. If it’s not right, we make it right, no argument, no fee, within one full year.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Pasadena since 2014.