Linear Gate Installation Nationwide

Linear Gate Installation in North Hollywood: What to Know First

Linear gate installation in North Hollywood runs between $850 and $2,400 for most residential jobs, depending on whether we’re installing a new operator on an existing gate or setting a full gate and operator from scratch. We’re an independent Linear service provider, which means we install, repair, and maintain Linear operators without being tied to the manufacturer’s authorized dealer network. Most Linear installations on existing gates are completed same-day or next-day; full gate fabrication and operator installs typically run three to five business days from the written estimate.

Call (213) 566-1045

This page is for the homeowner who already has a Linear opener, or is considering one, and wants straight answers about what installation actually involves in the North Hollywood market. If you want a written price before anyone touches your gate, call (213) 566-1045 and describe what you’re working with. We’ll write the number down, hand it to you, and you can decide from there.

Key Takeaways

• We install Linear operators on existing gates and build complete gate-and-operator packages for new installs.
• Written price before any work starts, with a photo record of every adjustment and part number left with you when we finish.
• We’re independent: we’re not a Linear authorized dealer, and we don’t push replacement when a repair makes more sense.
• Same-day and next-day installation for most existing-gate operator swaps in North Hollywood.
• 365-Day Done Right Promise on every installation we complete.

How Linear Products Fail - and How We Fix Them

Linear makes dependable operators, but they fail in predictable ways, especially in North Hollywood’s dry heat and the fine dust that settles into everything along the 170 corridor. Here’s what we actually find on service calls, and what we do about it.

• Linear PRO-800 and PRO-900 series: limit-switch drift. These slide-gate operators use mechanical limit cams that work loose over time, especially on gates that cycle more than 20 times a day. The gate over-travels, bangs the end stop, and the motor strains against the rack. We reset the limits, torque the cam fasteners, and photograph the new switch position so the next technician isn’t guessing. Under the Haven Standard Clause 4, that photo goes in your job file and in your hand.
• Linear LRA and M-series swing-gate arms: arm bracket fatigue. The pivot bracket that anchors the arm to the gate post takes the full brunt of every open-close cycle. We regularly see cracked welds and elongated bolt holes on North Hollywood gates that have been through a few wind seasons. This is not a motor problem; it’s a bracket problem, and replacing the operator without addressing the bracket just moves the failure date out a month or two. We inspect the bracket, weld or replace as needed, and only then mount the operator.
• Linear 3-Button Remote (MCT series): receiver range collapse tied to weak power-supply filtering. This one is specific and worth knowing. When the operator’s DC power supply starts filtering poorly, the radio receiver still powers up, but its effective range drops from roughly 100 feet to maybe 15. The homeowner assumes the remote is dying and replaces batteries or buys new remotes. We test the supply output first, replace the failed capacitors when practical, and save you from buying remotes that wouldn’t have fixed anything.
• Linear APeX series: photo-eye misalignment from sun warp. The photo-eye (the infrared beam that stops the gate if anything crosses the path) sits in plastic housings that warp slightly after a few North Hollywood summers. A two-inch misalignment sends the gate into reversal or prevents it from closing at all. We re-align, add sun shields where the exposure calls for it, and document the beam path in photos before and after.
• Linear SL series slide operators: chain tension loss after install. Chains stretch, especially in the first 60 days after installation. A slack chain causes gate shudder, noisy travel, and premature sprocket wear. If the original install didn’t include a tension re-check, the chain is probably loose. We set initial tension, mark the adjustment point, and schedule a courtesy re-check within 60 days on every new slide install in North Hollywood.

Before

After

Our Linear Gate Installation Process

Every Linear installation follows the same sequence, whether it’s a swing gate operator on an existing steel frame or a full double-gate build with a new slide track. Here’s what happens from the first call to the final walkthrough.

1. 1
   Phone diagnosis and written estimate. You describe the gate, we ask the questions that matter: gate length, weight, current operator model, power access, and whether the hinges or track are original. We give you a written price range before we ever dispatch, and the flat price is confirmed in writing when our technician arrives and inspects. Nothing gets installed without a number you’ve already approved.
2. 2
   On-site inspection and measurement. Our technician measures gate weight, checks hinge and bracket condition, tests existing electrical, and photographs everything relevant. Under Haven Standard Clause 1, you get the written scope and flat price before a single tool comes out.
3. 3
   Parts decision: OEM vs. tested aftermarket. For warranty-sensitive components like control boards and limit assemblies, we use Linear OEM parts. For common wear items like chains, brackets, and photo-eye housings, we use aftermarket parts we’ve run on North Hollywood gates for years without a callback. We’ll show you the part numbers and explain the trade-off before ordering.
4. 4
   Installation and wiring. The operator goes in, the limit switches get set, the photo-eye gets aligned, and every wire gets labeled. We’re in the habit of documenting wiring diagrams on the inside of the control box cover, a practice Adrian Vance carried over from commercial access-control work dating back to his time on the East Coast. The next technician who opens that box will see exactly what was done.
5. 5
   Cycle testing and load check. We run the gate through at least 20 full open-close cycles under load, check motor amp draw, and confirm the reversing edge and photo-eye trip correctly. If anything runs out of spec, we fix it before we call the job done.
6. 6
   Documentation and walkthrough. You get a photo log of every adjustment, a written record of every part number installed, and a demonstration of the gate’s operation. We walk you through basic maintenance and what to watch for, then we leave. The gate is level, the stops are set, and the paper trail is in your hands.

What Linear Gate Installation Costs in North Hollywood

Here are the numbers as they stand in the North Hollywood market today. These are flat, written prices, not estimates that drift upward after the fact.

• Linear swing-gate operator installation on an existing gate: $850 to $1,450, depending on gate weight and whether the arm bracket needs welding or replacement.
• Linear slide-gate operator installation on an existing gate: $1,200 to $2,000, depending on track condition, chain length, and whether we’re retrofitting an existing control box.
• Complete single swing gate with Linear operator (fabricated steel, standard residential sizing): $2,800 to $4,500.
• Complete double swing gate with Linear operator and both leaf arms: $4,200 to $7,000.
• Photo-eye replacement or re-alignment on a Linear system: $180 to $340.
• Limit-switch reset and tune-up on a Linear slide operator: $240 to $400.

What moves the price: gate weight and condition, bracket and hinge integrity, the distance from the operator to a power source, and whether we’re reusing existing wiring or running new conduit. We tell you the number before we start, and that’s the number on the invoice.

For a free written estimate on Linear gate installation in North Hollywood, call (213) 566-1045.

Why North Hollywood Homeowners Call Vance Gate Repair North Hollywood for Linear Work

North Hollywood has a lot of gates and a lot of companies that work on them. Here’s what separates us on Linear jobs.

We’ve installed and repaired more than 22,000 gates since 2014, and every single one had a written price before the job started and a documented record when the technician left. That’s not a slogan; it’s our operating procedure. The 365-Day Done Right Promise covers every installation: if something is not right within one year, we make it right at no additional charge. No argument, no fee, no expiration date inside that window.

We also work on all nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Linear operator is beyond repair and we’re recommending a replacement, you get an honest assessment, not a sales script. We don’t steer you toward a replacement when the fix is a $22 bracket.

A live person answers our phone at (213) 566-1045, 24 hours a day, seven days a week. No voicemail loop, no automated attendant, no callback queue. You call, a human picks up.

FAQs