FAAC Keypad & Intercom Repair Nationwide

FAAC Keypad & Intercom Repair: The North Hollywood Owner’s Guide

We stock FAAC-compatible keypads and intercom parts on the truck, and most FAAC keypad or intercom repairs in North Hollywood run between $190 and $520 installed, depending on whether we’re replacing the faceplate, the control board, or the entire unit. Same-day service is available when we have your part in stock, which is most days for common FAAC models. The usual discovery goes like this: the keypad works at the gate but not from the house, or the intercom rings but the voice audio sounds like a bucket of gravel, or the keypad backlight stays on while the buttons stop responding. Something worked yesterday. Today it doesn’t. That’s the call we get the most.

Call (213) 566-1045

Which FAAC Models This Applies To

FAAC uses a few keypad and intercom families across their gate operator lines, and the part number matters more than the operator model. The most common residential units we see on North Hollywood driveways are the FAAC 402-and-415-series keypads, the XKP and DK series (the latter often paired with FAAC’s 400 and 415 operators), and the FAAC DigiKey, which handles both keypad entry and intercom audio on one faceplate. On older installs, you’ll still find the FAAC 404 keypad and the RP433 receiver modules behind them. The compatibility gotcha: FAAC keypads talk to the operator through a receiver protocol, not through a hardwired Wiegand signal on every model, so a keypad that works on a 455D may not pair correctly with a swing-arm operator from a different FAAC generation without the matching receiver. Check the sticker inside the keypad housing, not the model on the motor. That sticker gives you the frequency and the version, which is what we match.

OEM FAAC keypads are solid, and we install them when the budget allows. But for North Hollywood homeowners with an older operator, a quality aftermarket unit like a Transmitter Solutions or a LiftMaster-compatible keypad with the correct receiver wiring often saves $100 or more and lasts just as long in our experience. We’ll tell you the honest split at the estimate, not just whatever costs more. Vance Gate Repair North Hollywood is an independent service provider, not affiliated with FAAC, and we service nine major automation brands, so we’re not steering you toward one parts catalog.

Signs Your FAAC Keypad & Intercom Repair Is Failing

• Dead keypad, no backlight, no beep. This is usually a failed control board inside the keypad or a break in the low-voltage wire feeding it. If the operator still works from a remote or the wall button, the problem is isolated to the keypad circuit, not the motor.
• Buttons work sometimes, then nothing. The membrane switch underneath the faceplate wears unevenly. One row of digits dies first, or the star key. Cleaning rarely fixes it long-term; the membrane is spent and the faceplate assembly needs replacing.
• Intercom rings but you can’t hear who’s there. The speaker or the microphone has failed, or the audio transformer on the intercom board is cooked. This is more common on North Hollywood gates exposed to full afternoon sun, which ages the plastic and the solder joints faster than shady installs.
• Keypad code stops working after rain. Water has breached the housing gasket or the faceplate seal. FAAC keypads are rated for outdoor use, but the gasket dries out over time and needs replacing when we see condensation inside the lens.
• Gate opens on its own or won’t stay closed. A failing keypad or intercom board can send phantom open signals to the operator. The operator is fine, the keypad is the culprit, and this is the one that scares homeowners the most.

Before

After

Replacement Cost & What’s Included

The installed price range for FAAC keypad and intercom repair in North Hollywood generally breaks down like this:

• Keypad faceplate or button membrane replacement: $190-$280
• Keypad control board replacement: $240-$340
• Complete FAAC keypad replacement, installed: $320-$450
• Intercom audio board or speaker replacement: $220-$410
• Full keypad and intercom system replacement, including receiver: $450-$520+

Those numbers include the part and labor. The price you’ll pay lands at one end or the other depending on the FAAC model we’re matching, the age of the wiring we’re tying into, and whether the receiver needs to be swapped along with the keypad. Every estimate is written before any work starts, per The Haven Standard, and it lists the exact part number, the labor line, and what we’ll photograph when we finish. You’ll get a documented photo record of the wiring, the new part, and the final programming test before we leave. If a repair doesn’t hold, the Vance Gate Repair North Hollywood 365-Day Done Right Promise covers it at no additional charge.

DIY or Call Us?

Here’s the honest split. You can safely do the diagnostic part yourself: check the breaker, confirm the operator still works from the remote or a wall button, and look at the keypad housing for cracks, condensation, or visible water entry. That’s worth five minutes of your time and it gives us useful information over the phone. But opening a FAAC keypad and swapping the membrane or control board involves low-voltage wiring and a receiver protocol that has to be matched correctly, and wiring it wrong can give the gate phantom open signals or cook the new board. We’ve walked up on more than one North Hollywood driveway where someone’s previous “repair” left the keypad working but sent the gate motor into a fault cycle. You don’t need to be the second person who discovers that. Call us at (213) 566-1045 for a written estimate before you touch any internal wiring.

FAQs