Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Burbank
A gate that will not open is more than an inconvenience on a Burbank morning, it is a car stuck in the driveway and a schedule upended before 8 a.m. Most gate repairs in Burbank run between $185 and $640, and our team reaches homes across the city, from the flats south of Burbank Blvd up into the Verdugo foothills, typically within 90 minutes. Call (213) 566-1045 and you will speak with a live person, not a voicemail queue. The written price comes before any work starts, every time.
Why Vance Gate Repair Is Burbank’s Preferred Gate Repair Company
Burbank is not a generic LA suburb, and gate work here does not follow the same pattern as Glendale or Pasadena. Our crews routinely service high-cycle commercial slide and swing gate systems on active studio lots like Warner Bros. and Disney, then cross town the same afternoon to rebuild a sagging wrought-iron gate on a 1940s bungalow in Magnolia Park. That split between industrial-grade demands and aging residential hardware is uncommon, and it means we carry the experience for both on the same truck.
We are led by Adrian Vance, who started in commercial access-control work in 2014 and brought a documentation habit, wiring diagrams, limit-switch readings, photo logs, into residential driveways. Every Vance technician arrives background-checked and in uniform, with name and photo sent before arrival. Every job leaves with a written record of what was found, what was adjusted, and what was installed. No future technician has to guess. No homeowner pays twice to rediscover the same fault.
Burbank customers tell us the same thing repeatedly: they want the price visible before anyone touches the gate. That is the entire point of Clause 1 of The Haven Standard. The flat price is written and handed over before work begins. If the repair is not right within one full year, the 365-Day Done Right Promise covers the correction at no charge. No argument, no fee, no expiration date within that window.
Our Gate Repair Services in Burbank
Our Gate Repair team handles the full range of repairs Burbank properties actually need, from a misaligned photo-eye on a Magnolia Park driveway to a cantilever slide gate on a foothill grade. These are the four we see most.
Electric Gate Repair
Electric gates in Burbank work harder than most people realize. Summer temperatures routinely cross 100°F, which accelerates motor burnout and pushes older capacitors to failure. We diagnose the control board, limit switches, photo-eyes, and the motor itself, then write down what we found before we touch anything. Most electric gate repairs in Burbank run $220-$480 in parts and labor.
Hinge & Post Repair
Homes built in the 1940s through 1960s across the flats and Magnolia Park often have original wrought-iron gates with hinge posts set in clay-heavy soil that heaves in Burbank’s hot, dry summers. The post shifts, the gate sags, and the opener burns itself out fighting the misalignment. We replace the footing, re-set the post in concrete, and re-hang the gate so the leaf swings true. Hinge and post repair in Burbank typically runs $340-$750 depending on footing depth and gate weight.
Gate Realignment
Slide gates on Burbank’s Valley floor lose alignment every summer because the metal rail expands in extreme heat and binds the rack-and-pinion drive. The track looks straight to the eye, but the gate drags, groans, or stops mid-travel. We measure the full travel path, correct the rail position, and photograph the new settings. A realignment visit in Burbank generally runs $185-$310.
Weld & Rust Repair
Rust is a fact of life on Burbank’s older ornamental gates, accelerated by hard municipal water and decades of exposure. We weld cracked pickets, replace rusted bottom rails, grind and re-coat, and match the existing profile so the repair does not stand out. Small weld repairs start around $145; full rust remediation on a large ornamental gate runs $500-$1,100 depending on the extent.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Burbank
We service nine major gate-automation brands, so we do not steer homeowners toward replacing a motor simply because we are unfamiliar with it. On Burbank properties we frequently work on Viking and Ghost Controls residential operators, DoorKing slide-gate systems on older ranch homes, and Elite commercial operators on studio-adjacent estates. We keep a rolling stock of common control boards, limit switches, and photo-eyes so most repairs do not wait on a parts order. If the motor on your property is a LiftMaster, FAAC, BFT, or Viking, we can work on it today.
Common Gate Repair Problems We See in Burbank Homes
- Summer track binding on slide gates. Metal rail expands in 100°F+ heat and the rack-and-pinion drive binds. The gate stops mid-travel or reverses, and the owner assumes the motor failed. We correct the rail alignment and document the new settings so the same repair is not re-billed next year.
- Hinge post failure on 1940s-1960s wrought iron. Burbank’s clay-heavy soil heaves in summer and settles in winter. Original concrete footings crack and the post leans, sagging the gate leaf. Re-setting the post is the fix, not shimming the hinges.
- Motor burnout from fighting a misaligned gate. An opener that labors against a sagging or misaligned gate burns capacitors and control boards far sooner than it should. We repair the mechanical problem first, then replace the damaged electrical component.
- Mis-specified gates on foothill grades. Streets climbing into the Verdugos, like Country Club Drive and the areas above Kenneth Road, need cantilever slide gates or proper swing-gate counterbalancing for the grade. Flat-valley installers frequently mis-spec these, and the gate binds within months. We correct the configuration.
Pricing for Gate Repair in Burbank, CA
Gate repair pricing in Burbank follows the same pattern as the work itself: straightforward residential fixes on the flats are modest, while foothill grades and studio-adjacent commercial systems run higher. A typical electric gate repair runs $220-$480. Hinge and post replacement runs $340-$750. Weld and rust work runs $145-$1,100 depending on scope. Slide gate realignment runs $185-$310. Every price is written and agreed before any work starts, under Clause 1 of The Haven Standard. We also offer a free second opinion, bring the written estimate from another company and Vance will review it at no cost.
We Also Serve Cities Near Burbank
Our Gate Repair in Burbank service area extends into the surrounding communities. We regularly serve North Hollywood, Studio City, Van Nuys, and West Hollywood, with the same written pricing and documented photo record on every visit. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve Burbank locally.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burbank
Burbank’s Valley-floor heat causes the steel gate rail to expand, and that expansion throws the rack-and-pinion drive out of alignment even when the track appears straight to the eye. We measure the full travel path, correct the rail position, and photograph the new settings so the repair is documented. Call (213) 566-1045 for a realignment estimate.
We can repair the original gate in most cases. We rebuilt a sagging wrought-iron swing gate on a 1950s bungalow off Magnolia Park after the hinge post footing had shifted in the hard, clay-heavy soil. The original LiftMaster operator was burning itself out fighting the misaligned rack and pinion, so we replaced the post footing, re-set the hinge post, and added a fresh safety photocell loop before testing the gate through a full 100°F heat cycle. It now runs quiet. Replacement is rarely the only option.
Yes. Under UL 325 and California building code, automatic gate operators in residential zones require entrapment protection such as photo-eyes, contact edges, or an inherent reversing mechanism. We verify that your existing protection is present and functional on every repair call, and we document the settings in the visit record. If it is missing, we include the correction in the written price.
For steep foothill grades, we generally recommend a cantilever slide gate configuration paired with a high-torque operator such as a DoorKing or a commercial-grade Viking that is rated for the gate weight and grade. Swing gates on these hills need proper counterbalancing or they sag and bind within months. Flat-valley installers frequently mis-spec this. We will write down the correct configuration and price it before any work starts.
That is a gate repair issue. We handle the low-voltage intercom wiring, the gate operator’s relay, and the access-control loop between the keypad, phone line, and control board. We also document what we find with wiring diagrams and photos, the same habit Adrian Vance brought out of commercial access-control work in 2014. Call (213) 566-1045 and describe what is happening; we will tell you whether we can fix it on one visit.
Call Vance Gate Repair in Burbank
If your gate is stuck, sagging, buzzing, or refusing to close, call (213) 566-1045 now. A live person answers around the clock. We will give you a written price before any work begins, send a background-checked technician with a name and photo before arrival, and leave you with a documented record of what was done. That is how we work in Burbank, on every job, no exceptions.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Burbank since 2014.
Gate Repair in Nearby Areas
